I have a 55" mitsubishi big screen and I'm having a problem accessing the ovd button...it won't even come up with an option to choose it - along with some other options they are lighter in color than the others and I don't have a remote at this time so I don't know what to do.....I don't have a manual either....anyways...needing to figure out how to get my digital cable working and don't know....can you help?
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 500 points.
Re: problem with t.v.
What is the exact model # of the set and i can assist you more. Is it a WS55807? Let me know and we can continue after that.
You definately need a HDTV Box from cable or i recommend the Dish Network for the $$. You can run 2 TV'S independantly off one receiver and watch 2 different things at once or record 2 things at the same time. They work great. But cable has its advantages also like ON DEMAND. It a good feature also. Let me know if this helps out. Thanks Jay
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Look for a big heat sink (big piece of aluminum) right behind the back access panel. The brown pressboard that you need to take of to have access to the inside of the chassis. I think there is two STK chips for this tv. Older mits only had one. The STK chip is black, should be about 3" long with about 20 pins on it. It may have a metal clip covering the part number on the front.
Scroll down screen to choose Configuration and select
Scroll down screen to choose Personal config. Settings and select
Now, press Add (visible if you don’t have a previous Personal Setting created) or press the Options button. when you have pressed the Options button, choose Add New. Then you will have several options to choose from.
Now, scroll down and choose the Access Point and select.
Choose option Access point settings and select
Go into Bearer Settings
Now, choose Packet Data Access Point
Now, enter your APN address corresponding to your operator, then press OK
Now, go back to the Personal Configurations Settings menu (press Back 3 times), where you now should be able to see an Access Point (or called My access point) selected.
Now press Options button, and then choose to activate the Access Point.
Washed out looking video with signal. Access the service menu, "menu 0357" use the audio button to select "video chroma" adjustments, use the video button to select item "40 - AGIW", use the adjust button to change the setting to 0, then press the enter button to store the change.
Good Luck, big IRISH. PS: don't change any other setting!!
Are you looking for the circuit board control panel? Or the actual frame that houses the buttons/ I have access to tons of mitsubishi parts.. Let me know what it is that youre looking for, I should be able to help you.