Inverted image - Sony Cyber-Shot DSC-T1 Digital Camera

You cannot invert it on antique dumpy levels. Modern dump level are designed with optics that do not invert the image.

Is there a setting for webcam which inverts the image? Check the settings for your webcam in the program which uses the webcam or any utility software come with the PC to manage hardware including the webcam.

WEBcam image problem
Most WEBcams have a setting to mirror or turn the image upside down etc. Go to your WEBcam setting to set your image back to normal.

hi,
You have to check the back light of your lcd TV. All lcd screen have a back light to illuminate the pixels. you can conform is the back light is faulty or not by watching the lcd screen nearby. Watch can you see any image (negative image) on the screen. you have to look very closely. if you see any image on the screen then the back light or the back light inverter is faulty.

You have to check the back light inverter board. Normally in lcd monitors you can see three circuit boards. power supply, mother board, and the inverter board. If available then try to replace the inverter board. There are high voltage transformers in this board. There is a chance for its winding get short. You will not get the transformer in open market. Try for the inverter board .
ok

These projectors are designed to either sit on a table, or be hung from a ceiling bracket. Depending on how it is used, the image may be upside-down, like what you are experiencing.

Most projectors have a function to invert the image. Check your manual, and see if the setup menu offers image invert, or something similar. Once you get it solved, you'll never have to fool with it again.

Yes, nothing is wrong. Most finders show upside down images.

When the TV is on, if you look at the screen and can see dark images, then you will need to replace both the inverters. The inverters drive/power the back light inside the LCD to show the images. You may have to try and different channels and or inputs to truly see if you can see dark images while the TV is on. If you are hearing audio from a channel or an input then you should be able to see the dark images if just the inverters are bad.
If the screen is dead black without any dark images, then typically your LCD screen/module is bad.
If the TV powers up (power supply is good), you have audio and the remote will work with the TV (the main board is good), the only parts left is the inverters or the LCD screen/module.
I can get you LG part numbers if you need them.

It is an inverter problem. Check all cable attachments first, then change out the inverter.

check the driver or the application configuration. there should be an option to invert the image and you need top make sure that it is unchecked.

Check throught the settings on any webcam software, there is usually an option to ip the image.