Speed dial on a aLucent 642D+

Which ones? System speed is programmed from station 10 or 11 and goes in the 6xx's, depending on your version of software. The start is FEATURE 00 FEAT 6xx and dial the number You can continue programming more numbers by pressing FEAT 6xx or Feat 00 to exit.

Personal speed dial numbers are programmed similarly, except they are in locations 80-99 on each phone and can be programmed from the phone if it's a system phone.

Auto Dial buttons use blank buttons on your set. Feature 00 pressing the button and dialing the outside number store those. Again, Feature another button will let you program another button, or Feature 00 ends programming.

Carl

If you entered them in system speed dial then you'll need to enterpgogramming on either extension 10 or 11. Enter programming by pressing feature 00,then press feature and the number of the speed dial bank (600-699), then enter in the number you want to over write. press feature 00 when finished.

If your trying to change one of the one touch buttons on the set itsself then press feature 00, press the button you want to change, then enter in the new telephone number. prsss feature 00 to exit programming.

At ext 10 or 11, press feature 00
then feature and 600 or whatever code you want
then enter the number as you would dial it.
when done, enter feature 00 to get out of programming.

If your changing the speed dial numbers under the individual buttons thats done by pressing feature 00, the button you want to change the speed dial number on, and enter in the new number.
If your changing the system wide speed dial numbers, From extension 10 enter in feature 00, press feature then the 3 digit code for the speed dial bank (600-699), then enter in the new telephone number. Either press feature and the next 3 digit code for the next number or press feature 00 if finished.

(For Speed Dials on you phone buttons)
1 Press Feature 00
2 Press the butoon to be programmed
3 Dial the speed dial #
Repeat 2 and 3 for additional #s
hope this helps

--- TeleFurb ---

To change the System Time:

1. Press feature +(00)+(left intercom)+(left intercom)+#103 at extension 10 or 11.
2. Enter a new time in 24-hour notation. For example, to set the time to 2:15 p.m., press 1415.
   A display similar to the following appears:
   System Time
   Data 1415
   This time appears on system display phones as 2:15 p.
   
   to program speed dials, press feature + (00)
   press the button you want to program
   dial the number you want programmed, then press feature 00

Press Feature 00 Press button that you want for speed dial. Enter number Press Feature 00

Give us more info. What functions do you need? Speed dials Feature 00 Press button to program Enter speed dial number Feature 00

from extension 10 or 11.

feature 00
pres the speed dial you want
feature 600, thype the number in.
repeat for as many as you want to modify
when done, press feature 00

Contact these guys (sorry they dont still have a manual online); http://www.alcatel-lucent.com/wps/portal/ContactUs Hopefully they can help you out :)