Clicking coming from timer magic chef m-1548-00

Most likely the control / clock needs replacing

Hi nschulman,

I believe your ignition switches have come in to contact with either water or moisture.

Please read my below Tip on how to fix the problem:

GAS KITCHEN APPLIANCE CLICKING SOUND...

If it does not solve your problem, I'd suggest replacing the ignition switches.

Kind Regards

JEDEMEYER1

* If you found this solution helpful, please rate it

Try Google your manufacture name model # and the word parts. This will not correct your lighting problem. It sounds like you have a igniter switch problem.

always unplug electricity before attempting to repair on any electrical appliance

The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to partially open or not open at all. The igniters are inexpensive and easy to replace. There is a video at www.appliancehelponline.com/servicemanual.html this will walk you thru the correct procedure for performing this test. It may be a different model but the testing will be the same.You can also enter your model # for diagrams and illustrations of your specific model. Not all models are available. All parts come with installation instructions.

twist off the burners
they will come off

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

defective touch pad or clock, Replace touch pad or clock (ERC). Touch pad is a more common problem.
you need a new :
"clock board"

hi..gud day ur magic chef is smaller than maytag? do u think the space of ur old unit is enought to fit the new one? 5inc are different.u waste ur money.

f1 is the code for a failed clock most of the times you must replace the clock most of them have a five year warrenty check your owners manuel for warrenty info

Dawnie, under each burner control there is a valve and a switch. One of your switches has either become wet or shorted out. This is why it's clicking. Sometimes grease gets in them and causes this problem. The part number for the switch is 7403p367-60. You can look it up on the net to see what Im talking about. Not a hard fix. Catriver..post back.