Firmware on main board 10000100 error

You installed the wrong board, it's common to see 3 or more non interchangeable main boards on RCA TV's the main board matches the panel, different mains for different panel. It won't be a firmware update.

http://printcopy.info/?l=en&mod=erc&brand=Toshiba&model=e-Studio%20223&code=C94

Exploded Views and Parts List Free!

Code

C94

Description

Firmware update error: An error message appears when either of the following Main PC boards is installed to e- STUDIO223/243. - The Main PC board for e-STUDIO181/211 - The Main PC board for e-STUDIO163/166/203/206

Causes

Remedy

Check the MAIN board. A C94 error message appears when either of the following Main PC boards is installed to e-STUDIO223/243. • The Main PC board for e-STUDIO181/211. • The Main PC board for e-STUDIO163/166/203/206.

Toshiba Studio 223 Error Codes

Epson Stylus Pro 4400/4800/4880 Error Codes
• Maintenance Request Codes:
• 0002 - CR Motor near end of life - Replace carriage return motor ASAP
• 0006 - Battery shut off - Replace RTC back-up battery
• 0040 - Cleaning unit near end of life - Replace cleaning unit ASAP
• 0080 - Date not set - Set the date through the printer control panel
• 0088 - RTC backup battery not installed - Install RTCbackup battery
• 0100 - RTC backup battery pressure is temporally low - wait for a while
• 0200 - The number of ASF paper feeding has reached predetermined value
• Service Call Codes
• 00000101 - CR Motor reached end of life - Replace carriage return motor
• 00010000 - PF encoder check error
• 00010001 - PF motor is out of step
• 00010002 - PF motor overcurrent has occured - Replace PF motor
• 00010003 - PF motor out of postion time-out error
• 00010004 - CR encoder check error - ensure enoder strip is clean & dust free
• 00010005 - CR motor out of step - click here for more info
• 00010006 - CR motor over current
• 00010007 - CR motor out of position time-out error - Replace the board assembley, main
• 00010008 - Servo interupt watchdog time-out error - Replace the board assembley, main
• 0001000A - Carriage home position detection error
• 0001000C - PG home position detection error
• 0001000F - CR motor PWM output faulty
• 00010010 - PF motor PWM output faulty
• 00010012 - CR overload (high sensitivity) error
• 00010013 - PF overload (high sensitivity) error
• 0001001B - Head Driver (TG) temperature error
• 0001001D - CR servo parameter error
• 0001001E - PF servo parameter error
• 00010020 - CSIC reading/writing error
• 00010022 - Ink type error (setting on printer body side)
• 00010023 - RTC analyzing error
• 00010025 - SCIS ROM communication error
• 00010026 - RTC communication error - click here for more info
• 00010028 - Head error - replace print head
• 00010029 - Unidentified NMI
• 0001002A - CR ASIC ECU error - Reinstall/update firmware
• 0001002B - PF ASIC ECU error
• 0001002D - Cleaning unit has reached end of life - replace cleaning unit
• 0001002F - 360 DPI writing time-out error
• 00010030 - Multi sensor error
• 00010031 - ASF phase detection error
• 00010032 - ASF drive switch error
• 00010033 - Eject phase detection error
• 00010034 - Eject movement error
• 00010035 - Pump phase detection error
• 00010036 - Type-B board installation error
• 00010037 - Head thermistor error - Replace print head
• 00010038 - Transistor thermistor error - Replace board assembley, main
• 00010039 - PG adjustment value incorrect overwrite error
• 0001003A - PG adjustment value outside range error
• 0001003B - Cutter installation error 1
• 0001003C - Cutter installation error 2
• 0001003D - Cutter installation error 3
• 00020000 - NVRAM error - Replace board assembley, main
• 00020002 - SDRAM error - Replace board assembley, main
• 00020003 - Boot program SUM error - click here for more info
• 00020009 - Flash memory SUM error
• 0002000A - Program load error
• 0002000B - The internal memory is insufficient
• 100000E0 - CPU address error (load)
• 10000100 - CPU address error (store)
• 10000180 - CPU reserved command code exception error
• 100001A0 - CPU slot undefined command exception error
• 100001C0 - The AC power is shut off
• 100005C0 - CPU DMA address error
• 10000xxx - CPU error
• 0003xxxx - Debug orode
• 0Dxxxxxx - An error code for debugging
• 0Exxxxxx - A time-lag of the RTC timer

The wrong model of firmware is detected in the MFP board you replaced when the main power switch is turned ON. Get a tech out to see if he can update the re-flash the copier OS firmware and or replace the NVRAM Bad move on your part can't replace boards !!!! each machine is set up with certain OS firmware, hopefully the tech can flash the firmware and get a new NVRAM and maybe new board ITS GOING TO BE EXPENSIVE

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

It is very important that you install the firmware as soon as you replace the board. You can download the firmware as well as the instructions for free from the customer support website. Here is the link. Sony eSupport KDL 55HX750 Support . It is very important to follow the instructions as to not ruin your new replacement board. Good luck to you.

Did you replace the main board if so the the small board on the main board does not match the info on the other board and you have a NV RAM error NVRAM stores the serial number counter info very important info. Need a tech to re-flash the firmware not drivers maybe a new board and NVRAM

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try upgrading the firmware and replacing the ddr2 memory first. if that doesn't do it you may be in serious trouble and have to: replace main-board , engine-board and/or the dimm on the main-board.

U have wrogly upgrade d the firmware.of the main board.Try with a fresh copy of original Samsung firmware.
Elase replace main board.

you need to replace the laser unit and upgrade firmware

Are you sure it is not 10000020?

If so, it is a CPU error:

􀂆 Cause of trouble:
Defective circuit board or faulty CPU soldering. Program trouble or generation
error.
􀂆 Remedy:
• Firmware Reinstallation
• Replace the MAIN Board

Firmware re-installation has to be done by either replacing the ROMM or through the parallel interface with a PC

This is all according to the svc manual. I'm not a tech.