SOURCE: KitchenAid dishwasher KUDS25SH - Can't operate because child lock
If holding the "Energy Saver/Dry" button does not solve the control board problem then most probably the control board would have failed and needs to be replaced .
To identify it we need technical expertise in handling the circuit boards and knowledge on usage of multimeter is must.
SOURCE: I have the KitchenAid undercounter
Did you try holding the energy save button for 10 seconds I thought that was how you were supposed to unlock the child lock on the unit. Also did you try unplugging the unit as well for 7 minutes this usually causes the control to reset in the unit. I await your reply to how you make out with these suggestions. If this does not work then one or more of the pads on the control panel is stuck and if this were the case then you would have to replace the control panel if you have any further questions message me back. Thanks Rick
Hi
To reset the dishwasher control you have to press and hold the HEATED DRY button for 15 seconds, if its still not resolved
then it means that the control board has gone bad and should be replaced. Hope
this helps...please post back for further assistance.
Daniel
Hi
First make sure that nothing is blocking the drain pump
assembly located inside the lower front panel of the dishwasher. If the issue
returns after its cleaned then try to reset the dishwasher control by pressing
the HEATED DRY button and hold it for 15 seconds, if its still not resolved
then it means that the control board has gone bad and should be replaced. Hope
this helps...please post back for further assistance.
Daniel
186 views
Usually answered in minutes!
×