Question about Tools & Hardware - Others
Just about any hardware store. take the staple gun with you and ask a clerk or floor person.
Posted on Nov 05, 2013
SOURCE: Staple Gun Troubleshooting
Most of the staple gun models lack an "anvil" — the metal plate with curved slots that office staplers use to bend the legs of the staple inwards and flattens them against the paper. Staples set with a staple gun retain their straight legs, and are held in place only by static friction of the legs against the compressed surrounding material, much like common nails. Indeed, some staple gun models can handle brads and nails as well as staples. Some staple guns also use divergent point staples where the legs twist as the staple drives into the surface providing superior holding power.
Posted on Aug 27, 2008
SOURCE: staple gun
Open the chamber and drop the staples upright in to the chamber do not try to load the staples by placing them on the strip that pulls out as you do with most staple guns.
Posted on Nov 25, 2008
SOURCE: reloading ace 22084 staple gun
when you purchase staples for this particular gun even though you might get a staple that is says it fits this gun you need to look at the type of staple if you get the one that says heavy duty it will not work it took me 2 times to find out the right ones for this gun it comes in a green box and says standard duty on it not heavy duty this is where most people make their mistake. ok?
best regards michael
Posted on Oct 03, 2009
You should not need any tools to lift the guard/nose piece. The T5 nose piece cleary has engraved on it "Pull Up To Insert Staples". To remove old staples, use a pencil or similar rod to depress the hammer/striker above the staples while the nose is open.
Posted on Aug 07, 2010
Tips for a great answer:
Mar 08, 2018 | Staples Tools & Hardware - Others
Jul 25, 2015 | Stanley ®Bostitch TR150 Staple Guns Tools
Mar 31, 2015 | Electric Stanley Tre500 Staple Gun /...
Jan 16, 2013 | Tools & Hardware - Others
Jan 23, 2010 | Stanley Hand Tools
Jan 12, 2010 | Stanley Bostitch 18 Gauge Brad Nailer 1 -...
Aug 10, 2009 | Stanley Bostitch STB-MIIIFS Flooring...
Jan 23, 2009 | Desa International Tools & Hardware -...
292 people viewed this question
Usually answered in minutes!