Question about Televison & Video

2 Answers

Polaroid, 32in, HD LCD.

I have owned my Tv for about a year to a year and a half. After keeping the TV on for 30 minutes the screen gets lines in it and then turns off. How can I fix this? Is there a waranty? Where do I take it to get fixed?

Posted by superEman on

  • 3 more comments 
  • Anonymous Nov 16, 2007

    I changed the powercord fuse, but still i get nothing not even a standby light.

  • locarte Mar 12, 2008

    We've had the TV for about 2 years. In the middle of a program, it just turned off and we can not get it to turn back on. It appears to be "dead" since we can not even get a standby light.

  • Anonymous Oct 15, 2008

    same problem.... I need help!!!

  • Anonymous Dec 16, 2008

    My gateway lcd will not turn on can i get parts for it went out just after a year

  • yumyumman Dec 27, 2008

    Red light stays on but green will only go on now and then. 32FD9954. Any thoughts? Scott

×

Ad

2 Answers

Anonymous

32 flat panel polaroid will not turn on

Posted on Oct 06, 2007

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Tengo 5 tv polaroid fml-2011 y no tengo controles necesito saber cual control universal es compatile

Posted on Apr 18, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is lamp location in polaroid 32in hd tv

Your model is a LCD flat panel which doesnt have a lamp. Instead they have a series of flourescent tubes behind the Screen which light the screen. The backlights hardly ever fail its usually the Inverters which fail when you dont have any picture with that model. You can get the inverter board and free technical assistance from www.tvrepairworld.com
1helpful
1answer

My Toshiba 46XV540U LCD TV. Has ghost image plus many white vertical and horizontal line when it is turned on. These lines and the ghost image stay for 20 to 30 minutes and than the picture becomes clear....

Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish board that call T-CON board to do a replacement.This T-CON board sit in the middle at the bottom of the tv LCD screen panel.This T-CON board control all the picture pixels going throught to the tv LCD screen panel.
3helpful
1answer

Polaroid tv screen goes black after 30 40 minutes, sound is good. No picture. Turn set off and wait a few minutes and the picture returns for a few minutes then goes black again.

Ur tv now power on only have picture few mins,than dead,have sound only?Yes,than the 1 or 2 the long board call the LCD inverter boards are dead.The LCD inverter long boards help the LCD screen to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy 1 or 2 long LCD inverter boards for the replacement.
0helpful
1answer

TV goes to blank screen after turning it on (about 3 to 4 minutes) but I can still hear it fine. I turn it off and wait a few minutes(5) then turn it back on everything is normal then it goes back to blank...

This tv the LCD inverter board is dead,that why is not sustanning backlight for the LCD screen light to have the picture.Call Polaroid for warrenty repair,this tv under a year old.
0helpful
1answer

Half of my lcd tv gets dark no picture

Find your warranty papers....may be a defective screen.
7helpful
5answers

3 horizontal lines through screen and distortion

Yes this thing start happening to my tv too about 4weeks ago and this goes away in about 15 minutes. TV is only 18 month old and I donot have extende warranty. Please post the solution if someone has got it repaired. Thanks
1helpful
2answers

Buzzing TV- Polaroid 37" FLM-3732

i fixed one by put 2 new caps in c112 and c113 1000uf 10v
11helpful
2answers

Screen goes dark after few minutes

check your LCD inverter maybe there is loss connection or some parts damage from inverter.
0helpful
1answer

Polaroid LCD TV 37" Black screen

I had the same problem. But found the fix on this website!!

http://www.fixya.com/support/r741402-polaroid_flm_373b_lcd_tv_black_screen

Not finding what you are looking for?

Open Questions:

0answers

My samsung TV UN70NU6070FXZC can't turn on, the red light blink 2 times with dark screen and no sound, and this cycle repeated after about 20 seconds again and again. What issue is it and how to do?. My samsung TV UN70NU6070FXZC can't turn on, the red light blink 2 times with dark screen and no sound, and this cycle repeated after about 20 seconds again and again. The Tv reboot again and again. Have to unplug power cord to stop it. Samsung Main board BN94-14106C, Power supply board BN44-01016A 1. Disconnect main board from power supply board: plug power cord, backlight on, output=13v ch1=120v ch2=80v ok. 2. Connect power board to main board disconnecting two connectors to screen, it can be turned on/off normally. No T-con board is found, is it included in the main board or side board? a. TV Standby: red light on, sound off, backlight off. on power board output=12v ch1=ch2=0v, on main board SW=0.1v PW=12vx2, HAVDD=AVDD=VGH=VGHD=0v FB_TRDY_3=0v. b. TV On: red light off, sound on, backlight on, on power board: output=13v ch1=124v ch2=82v, on main board: SW=3.3v PW=13vx2, HAVDD=AVDD=VGH=0v FB_TRDY_3=0v VGHD=0.1v. It seems that video part of the main board is not working? 3. Only connect anyone of the two screen connectors to main board connecting to power board, it can be turned on/off normally. a. TV Standby: red light on, sound off, backlight off, dark screen. on power board output=12v ch1=ch2=0v, on main board SW=0.1v PW=12vx2, HAVDD=AVDD=VGH=VGHD=0v FB_TRDY_3=0v. b. TV On: red light off, sound on, backlight on, dark screen. on power board: output=13v ch1=124v ch2=82v, on main board: SW=3.3v PW=13vx2, HAVDD=AVDD=VGH=0v FB_TRDY_3=0v VGHD=0.1v. It seems that video part of the main board is not working too? Maybe both of left-screen and right-screen be faulty? It seems not to be possible. It is same if only disconnect anyone of the four screen connectorsillustration tv . 4. Connect both of the two screen connectors to main board connecting to power board, it can't be turned on/off normally. Dark screen, red light&sound&backlight blink 2 times for 2 seconds then all off. on power board output=13-12v ch1=115-105-0v ch2=77-70-0vbacklight: lightness-a little lightness-dark, on main board SW=3.3-0.1v PW=13-12vx2, HAVDD=about 6-0v AVDD=about 10v-0v VGH=about 14v-0v VGHD=about 11-0v FB_TRDY_3=3.3v-0v It seems that video part of the main board is working now?. And then after 20 seconds the cycle repeats again and again!! I had to unplug power cord to stop it. I replaced the main board and power board, nothing changed.

Televison & Video Logo

Related Topics:

291 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76633 Answers

Cindy Wells

Level 3 Expert

6281 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...