Reset maintenance in display kettler track performance

then return it w/receipt to point of purchase

After 5 seconds stop the treadmill and err 91 what is the problem , which parts has to replace. Speed censor is good when checked with another pcb.

Usually you can't reset an hour counter, as it is designed to report total hours of runtime on a machine -- much like an odometer tracks total mileage on a vehicle. Instead, write down the number of hours displayed when you perform service on the machine, and calculate how many hours will be showing when the next maintenance is required.

this a problem with the elevation motor. You are working with the treadmill without put in level.
You need LUBE the gear+shaft see the picture. But most importante adjust the POTENTIOMETER a little see the diagram attached.
God bless you

Dear Sir:
Execute maintenance according with the instruction manual guide.

If you do not have ins.manual download for free:www.fitness.manualsonline.com or www.iconservice.com

sincerely. God bless you.

I have the same problem, it developed in the past few days. I've written to Kettler for assistance but not received a reply yet.

Hi Rendra,

Try this:
Switch the treadmill off and then on again.
Push the "minus" speed button and the "stop" button simultanuously.

If all is well you will now have entered the maintenance mode.

Next push the "plus" speed button and the "stop"button smultanuously.
Now you you've reached the error mode.

Push the "plus" or "minus" speed button to browse the error codes untill you've reached "L er".
The push start to erase the message.

Turn the power off and then on again to restart the treadmill.

With any luck the error has disappeared and the treadmill will function again. If not.....you'll have to contact Kettler.

Btw...This error occurs when the belt is "pushed" by the runner. For example when you put weight on the handlebar and the push your feet backwards.

The printer keeps track of how many pages you have printer and will notify you when you need to install a maintenance kit and perform a maintenance reset. You can order a kit here and there is a video on how to install and perform the reset.
http://www.fastprinters.com/dell-fusers-maintenance-kits.asp#W5300

We have a different year but most of these warnings are reset the same way the trp odometer is done; press and hold one or the other buttons related to the display until it changes.