Only one of the plot options is turned 'on.' Both lists have equal dimensions. When I do ZoomStat after doing the Stat Plot, I get quit, goto error. Test tomorrow! Help!

Ad

Ad

if you are trying to graph a function that does

not involve the stat plot features. The error can

be corrected by turning off the stat plots. To

turn the stat plots off, press 2nd (stat plot) ,and

then select 4:PlotsOff.

ā¢ You specified a list dimension as something

other than an integer between 1 and 999.

ā¢ You specified a matrix dimension as something

other than an integer between 1 and 99.

ā¢ You attempted to invert a matrix that is not

square.

Sep 13, 2014 | Texas Instruments TI-84 Plus Calculator

The **ERR:INVALID DIM** error message may occur

if you are trying to graph a function that does

not involve the stat plot features. The error can

be corrected by turning off the stat plots. To

turn the stat plots off, press y ,and

then select 4:PlotsOff.

ā¢ You specified a list dimension as something

other than an integer between 1 and 999.

ā¢ You specified a matrix dimension as something

other than an integer between 1 and 99.

ā¢ You attempted to invert a matrix that is not

square.

if you are trying to graph a function that does

not involve the stat plot features. The error can

be corrected by turning off the stat plots. To

turn the stat plots off, press y ,and

then select 4:PlotsOff.

ā¢ You specified a list dimension as something

other than an integer between 1 and 999.

ā¢ You specified a matrix dimension as something

other than an integer between 1 and 99.

ā¢ You attempted to invert a matrix that is not

square.

Apr 05, 2014 | Texas Instruments TI-84 Plus Calculator

a function that does not involve the stat plot features. The error can be

corrected by turning off the stat plots. To turn the stat plots off, press

y , and then select 4:PlotsOff.

Jan 19, 2012 | Texas Instruments TI-84 Plus Silver...

You are trying to perform an operation that references one or more lists or matrices whose dimensions do not match. For example, trying to multiply a five-element list by a two-element list will produce this error because the number of elements in the lists do not match.

If you're getting this while trying to graph a function, it's probably because the calculator is expecting stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

If you're getting this while trying to graph a function, it's probably because the calculator is expecting stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Feb 25, 2011 | Texas Instruments TI-84 Plus Calculator

Hi scarfacecoke,

One of the statistical plot's may be on while your trying to do other functions. You can go to the y= editor / STAT editor and, turn them all OFF.

1). Press [CLEAR] at the Home screen

One of the statistical plot's may be on while your trying to do other functions. You can go to the y= editor / STAT editor and, turn them all OFF.

1). Press [CLEAR] at the Home screen

2). Press [2nd][Y=] Open's the (STAT PLOT) editor screen.

3). Press [4:PlotsOFF]

4). The PlotsOff Command should now display at the Home screen.

5). Press [ENTER] , Now the plots should be off are off

If you still have this error even after you turned off the plot you may have a list that is a invalid dimension. List dimensions can only be between 1 and 999. A matrix can only be between 1 and 99. Or your trying to invert a matrix that isn't square.

If you can't find the list that is causing you problem you can clear all the lists. To clear all the lists press [2nd] [MEM][4][ENTER] This should set all lists dimensions to 0.

Jan 12, 2011 | Texas Instruments TI-84 Plus Calculator

Go to http://education.ti.com/downloads/guidebooks/graphing/84p/TI84Plus_guidebook_EN.pdf
to download the manual. On page 401, you will find the following:

INVALID DIM ā¢ The ERR:INVALID DIM error message may occur if you are trying to graph a function that does not involve the stat plot features. The error can be corrected by turning off the stat plots. To turn the stat plots off, press y , and then select 4:PlotsOff. ā¢ You specified a list dimension as something other than an integer between 1 and 999. ā¢ You specified a matrix dimension as something other than an integer between 1 and 99. ā¢ You attempted to invert a matrix that is not square.

INVALID DIM ā¢ The ERR:INVALID DIM error message may occur if you are trying to graph a function that does not involve the stat plot features. The error can be corrected by turning off the stat plots. To turn the stat plots off, press y , and then select 4:PlotsOff. ā¢ You specified a list dimension as something other than an integer between 1 and 999. ā¢ You specified a matrix dimension as something other than an integer between 1 and 99. ā¢ You attempted to invert a matrix that is not square.

Nov 11, 2010 | Texas Instruments TI-84 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Sep 24, 2010 | Texas Instruments TI-84 Plus Calculator

Hi,

From what I understand you want to draw statistical graphs (scatter plot, box plot, etc.) If you do not see anything it may be due to the fact that the statistical plots are turned off.

Type in the data in lists L1 and L2, etc. Press [2nd][QUIT]

Press [2nd][Y=] (STAT PLOT] . Select [4:PlotsOff] [ENTER] .

Screen displays** Done **

**Press [2nd][Y=] (STAT PLOT] . Select [1:Plot1 Off]. **

Hope it helps.

Thank you for rating the solution.

From what I understand you want to draw statistical graphs (scatter plot, box plot, etc.) If you do not see anything it may be due to the fact that the statistical plots are turned off.

Type in the data in lists L1 and L2, etc. Press [2nd][QUIT]

Press [2nd][Y=] (STAT PLOT] . Select [4:PlotsOff] [ENTER] .

Screen displays

- The configuration screen for Plot1 opens with the cursor blinking ON.
- Press [ENTER] to turn Plot1 ON.
- Use Down Arrow to move cursor to second line Type:
- Select the type of statistical plot. Use the right arrow to move highlight on one of the 6 types.
- Select the type:scatter, Xline, histogram, box plot, and press [ENTER] to validate the choisce.
- Use down arrow to select the Xlist: use [2nd][1] to choose L1, etc. and press [ENTER]
- Select the Y-List (L2) and validate by pressing [ENTER]
- Select the data-point mark.
- Press [GRAPH].

Hope it helps.

Thank you for rating the solution.

Dec 09, 2009 | Texas Instruments TI-83 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features.

Press GRAPH F1 to enter the equation editor.

Plot1 Plot2 Plot3 on the top line of the equation editor displays the on/off status of each stat plot. When a plot name is highlighted, the plot is on. To toggle the status, press up, left, and right to place the cursor on the name, then press ENTER.

Press GRAPH F1 to enter the equation editor.

Plot1 Plot2 Plot3 on the top line of the equation editor displays the on/off status of each stat plot. When a plot name is highlighted, the plot is on. To toggle the status, press up, left, and right to place the cursor on the name, then press ENTER.

Sep 30, 2009 | Texas Instruments TI-86 Calculator

This is a pretty vague problem but not much of a problem. Your actualy
plotting device of your stat plot is under your "y=". But before you do
that you need to hit the stat button right next to the blue apps
button. Then hit edit. These are your stat data.
If you are trying to add data in you should notice what list they are
under. (top of the screen L1, L2, ect.) You should also make sure that
the number of data adds up for your two list. Now that you have done
that you can go to "2nd" then hit "y=". If you don't want to graph your
stat plots just make sure they all sat plot... off by hitting enter on
the one that says that it is on. Now if you want one on hit enter and
make sure your lists from your data match up with your stat plot. You
can hit enter and see what one you need. they are above the 1, 2, 3,
etc key. Hope this works. If all else fails you can clear your
calculator by pressing "2nd", "+", "7", "1", "2". This will turn off
all your stat plots if you have trouble understandsing this. But most importnat make sure your L1 and L2 match up on your stat plot with your list under your stat edit. If you don't understand this just i can help you out some more

Dec 29, 2007 | Texas Instruments TI-84 Plus Calculator

207 people viewed this question

Usually answered in minutes!

×