Question about Robot Coupe Food Processors

1 Answer

Robot coup makings high pitched sounds and drive shaft seems to lock up

Posted by chris on

Ad

1 Answer

Bruno Man

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 62 Answers

Sounds like the bush is either worn, or the shaft has got rusted.

Posted on Nov 22, 2013

Ad

2 Related Answers

Anonymous

  • 3 Answers

SOURCE: robot coupe r 301 ultra

Remove the base the screws are under the rubber feet,on top of the machine there are three screw caps remove these with a bradel, unscrew screws with large torx screw driver, remove spindle anti clockwise by locking out fan at base. for all Robot coupe parts go to http://www.catering-machines.com/

Posted on Sep 11, 2008

Ad

Capt Rick

  • 81 Answers

SOURCE: How do I assemble the Robot Coupe R 2 Ultra

Cindy,
Send me your e-mail & I will send you back an exploded view of your Robot-Coupe. It will give all the info needed. [email protected]

Posted on Jul 25, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Robot coupe food processor RC2800 SN: R2579592 120v 6amp has no power at all, and power supply is good


You will need to find a "small appliance repair shop" in your area, most likely the main PCB has failed, it controls the motor. Check the yellow pages.

Aug 19, 2016 | Robot Coupe Food Processors

1 Answer

I have a Robot Coupe R2 food processor that quite


It just a long shaft phillips screwdriver. The screws are located under the foot pads. They just pull out and then there are the four screws.

Dec 29, 2009 | Robot Coupe R2U Ultra Food Processor

1 Answer

Looking for spare parts for a Robot Coupe R301 Ultra Food Process


Robot-Coupe USA.com should be able to sell you anything needed

Jul 09, 2009 | Robot Coupe Food Processors

1 Answer

How do i seperate the housing on a robot coupe processor


There are 4 rubber shoes on the bottom of the white or gray base. Twist & pull these out. With a TORX long shank screwdriver (nothing else works, trust me) there is a screw way down in each hole. After removing the screws a gentle but firm bump should loosen the base. If you ever need to replace the motor, on the top around the drive shaft you will see three round plugs/disks, remove them by prying up with a pocket knife (works best) this will give you access to the three motor bolts.

Feb 20, 2009 | Food Processors

1 Answer

Makes humming sound motor will not spin


Did you replace the start capacitor or start relay first ? This is the most common problem & a hell of alot cheaper than a new motor. Did you replace the motor shaft seal (around the shaft on top of the unit ? if not you will be replacing the motor sooner than you need to because the acids from veggies eat these things up & is the main reason why the motors fail, next in line is overloading or forcing product.

Sep 15, 2008 | Robot Coupe Blixer BX6 Food Processor

1 Answer

Robot coupe r 301 ultra


Remove the base the screws are under the rubber feet,on top of the machine there are three screw caps remove these with a bradel, unscrew screws with large torx screw driver, remove spindle anti clockwise by locking out fan at base. for all Robot coupe parts go to http://www.catering-machines.com/

Jun 06, 2008 | Food Processors

1 Answer

Robot coupe maintanance


That plastic piece is a sling disk or sling blade and made to sling product to the discharge chute. Believe it or not, the motor shafts wear out and could be the cause of premature failure. When you install the new sling blade, check to see how much slop/ play there is by moving this back and forth on the shaft, a small amount is ok (1/16th to 3/32nds). The other thing to look at is forcing or overfeeding the unit. You can contact them at Robot-coupeusa.com

Nov 15, 2007 | Robot Coupe CL50 Food Processor

1 Answer

How do I assemble the Robot Coupe R 2 Ultra


Cindy,
Send me your e-mail & I will send you back an exploded view of your Robot-Coupe. It will give all the info needed. [email protected]

Nov 02, 2007 | Robot Coupe R2U Ultra Food Processor

Not finding what you are looking for?
Food Processors Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Robot Coupe Food Processors Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

ray gallant

Level 3 Expert

71004 Answers

Tom Chichester

Level 3 Expert

61177 Answers

Are you a Robot Coupe Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...