Blur viewing - Canon PowerShot A710 IS Digital Camera

try to adjust the camera lens. hold the lens housing and slowly turning left and right. k good am

"...even though the screen is clear"...?

The screen is a tiny view of the picture and you cannot see all the details of the shot that way. The only way to be sure is to zoom in on the details when viewing the photo on the screen.

Please see the following comment:

i beleave on auto, the a75 has auto focus, there is a 1/2 second focus time before the picture is taken, enough to blurr the picture

A friend managed to find a very easy solution to this problem...the lens was dirty due to a 6 year olds sticky fingers...so I just needed to clean it.

If the focus is blurred on the view finder, assuming you are talking about the eye piece and not the lcd, then it is a out of focus issue. Even though when you view it it's ok. Some cameras still have a focus knob somewhere to focus the eye piece.

try resetting ur browser settings to default ...

Buy a new camera

The viewfinder image should look sharp & clear, as long as the camera is turned ON. If the camera is OFF, the viewfinder image will blur. At least this is how it works on my C2000z. If your viewfinder is always blurry, I would return the camera for exchange.