Security code bypass - Eclipse AVN5435 Car DVD Player

There are no 'Bypass Codes'. They are designed to be secure. Lots of sites promising it, but that are all malware sites.

https://www.google.com/search?q=Conlog+bypass+codes+for+free+units

..

Never created / do not know security code
Review the following information:
The default security code is 12345 for most Nokia phones.
If you enter an incorrect security code five times in succession, the phone ignores further entries of the code.
Wait for five minutes and enter the code again.
Note that there is no approved Master Security Code generator available at this time from Nokia.

The security code cannot be bypassed but possibly the information below will help

? Access codes

• The security code, supplied with the phone, helps to protect your phone against unauthorized use. The

preset code is 12345.

• The PIN code, supplied with the SIM card, helps to protect the card against unauthorized use.

• The PIN2 code, supplied with some SIM cards, is required to access certain services.

• PUK and PUK2 codes may be supplied with the SIM card. If you enter the PIN or PIN2 code incorrectly three

times in succession, you will be asked for the PUK or PUK2 code. If you do not have them, contact your local

service provider.
Select Menu > Settings > Security settings to set how your phone uses the access codes and security settings.

there is no easy way. the problem is most likely the key tumbler failed and a code will indicate this. if it was easy to bypass the security it wouldnt be security.

you can bypass the security code if you know your IMEI number. Please pass me your IMEI number.

need security bypass code for panasonic cq-vad 7200u

HI dude,
to bypass the security, i hv got a trick.
When u r asked for security code,
press menu button(above the directional keys) for 3-4 seconds. if u hv done properly the gap for 4 digits will be changed to 6 digits slot. Now enter 000000 (six zero). now u will bypass the security code. By same process u can change or reset security code from settings.
=================================================================
Looking for ur kind feedback. Dont forget to Rate my solution too.
Be sure to post a clarification request after ur problem is solved.
=================================================================
SAJAN([email protected]/[email protected])

Hi redevil,
For resetting code, u need to bypass the security code.
To pass the security code, follow this step :
1) when it asks for security code, press and hold menu button(the top button above the direction keys) for 3-4 secs.
2) then the gap for inserting security changes from 4 to 6 lettered.
3) type 000000 (six zero) and bypass the security code.
4) Use same process while changing or reseting ur security code. OK!
================================================
Send me feedback and rate my solution.
Be sure to post a clarification request for ur problem after it is solved.
SAJAN ([email protected]/[email protected])

HI dude,
U can bypass the security code rather than this problem, i hv got a trick.
When u r asked for security code,
press menu button(above the directional keys) for 3-4 seconds. if u hv done properly the gap for 4 digits will be changed to 6 digits slot. Now enter 000000 (six zero). now u will bypass the security code. By same process u can change or reset security code from settings.
=================================================
Looking for ur kind feedback. Dont forget to Rate my solution too.
Be sure to post a clarification request after ur problem is solved.
===============================================
SAJAN([email protected]/[email protected])

HI dude,
to bypass the security, i hv got a trick.
When u r asked for security code,
press menu button(above the directional keys) for 3-4 seconds. if u hv done properly the gap for 4 digits will be changed to 6 digits slot. Now enter 000000 (six zero). now u will bypass the security code. By same process u can change or reset security code from settings.
=================================================
Looking for ur kind feedback. Dont forget to Rate my solution too.
Be sure to post a clarification request after ur problem is solved.
===============================================
AWESOMEASHU(ashutosh_hitman@yahoo.co.in)