How can I fix an error F 26 appearing on my 1216

replace the developer and the drum and have the tech clean all around the drum area and the sensors

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The Access to this page has been denied by your administrator
https://www.facebook.com/

The printer stops working & showed me an error code F-26-1

www.fixya.com/.../t16683015-printer_stops_working_amp_showed_me

Feb 20, 2013 - the printer stops working & showed me an error code F-26-1 , How can I repair it ? I think it s relating to a - Konica Minolta 26NA53040 7130 ...

Konica Minolta 26NA53040... Repair Questions - Fixya

www.fixya.com/.../p4700437-konica_minolta_26na53040_7130_7025_...

Konica Minolta 26NA53040 7130 7025 7020 Oem Lower Fixing Roller Assy New ... Theprinter stops working & showed me an error code F-26-1 , How can I ...

hi piz Error code P9 and P21 appears on screen and when printing or photocopying using color black, blank copies are outputed

0000

MY COPIER FLASHES P.26 CODE WHAT I DO?
OR ISSUED TO RETIFY IT

dear sir i have information P 27 on my konica copier. how do i solve the problem..?

That's a fuser error condition...I'll have to get back to you because i have to check in my book to remember how to reset it...Thank you for your patient !

The error code p27 the toner density sensor unplugged/dirty/faulty
Any problems please get back to me
thank you

My service info doesn't go back that far either, but this procedure should work to reset the code. However, I would make sure there's no toner build-up on the fuser thermistor or thermostat first, otherwise the code will reappear.

Here's the instructions on clearing the code:

Enter the 25 mode by holding down the 2 and 5 keys while turning on the copier.
Press the P key, then enter 47, then press P again.
Enter 0 and press the Print key.
Turn the machine off/on to exit the 25 mode.

If the code reappears, then theres a problem. If it doesn't, you're good to go!