Question about Scala-Rider Cardo Scala Rider Q1 TeamSet Intercom Bluetooth Headset

1 Answer

Scala rider connects to phone 1 and phone 2 and after 10-15 seconds it shut down

Posted by Paul Poels on


1 Answer


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Give it back. I also have problems with my Scala rider Q1 system. I would not pay R 200 FOR THIS TYPE OF RECEPTION and i have payed R3000. Bad deal.

Posted on Dec 18, 2013


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My scala rider g4 detects iphone but does not pair

All I did was clear it from the phone and made sure I had a full charge on my scala. Then I just reconnected it. That was it. Once I had made sure I had the full charge that was it.. Done. Hope this helped. Regards, Denise

Jun 09, 2014 | Cardo scala 700LX Bluetooth Headset

1 Answer

Not pairing with other devices

Have you turned blue tooth settings on your phone? Also you can pair your phone if the Bluetooth is working. Otherwuse you may be out of range. If that does not work have someone else try the bluetooth to eliminate the problem is with your phone.

Nov 15, 2013 | Cardo Scala Rider Teamset Pro

1 Answer

The scala rider Q G A won't pair with my I Phone it keeps saying swich your scala on

The scala rider Q G A won't pair with my I Phone 4S it keeps saying nothing

Nov 10, 2012 | Radio Communications

1 Answer


Please find here a link to google search where the first 2 results are for the scala rider headset rider user manual

Jun 20, 2011 | GPS

1 Answer


I had a similar problem when I first connected my Cardo Scala Rider set to the helmet. First off, make sure that the volume on the Zumo is set to 100% for BOTH guidance and mp3 functions. Then click the upper control on the Cado Scala to maximize the volume of the headset. When you've accomplished those two electronic hurdles, adjust the location of the speakers in the helmet - if location of the speakers is not optimized nothing you do with the electronics will have much effect. I typically run the mp3 volume at 20% and the GPS at 50% with the headset volume at halfway. My Cardo Scala unit is a Teamset and I sometimes have problems hearing my rider scream that I'm going too fast. I haven't bothered yet to tell her to keep the microphone closer to her lips.

Aug 07, 2008 | Garmin zumo 550 GPS Receiver

2 Answers

Cardo scala rider operators manual

the ususal way to turn on a scala rider headset is to hold the symbol fo rabout 5 seconds then hold just behind the symbol for another 5 sec's untill the light blinks red and blue then it will be able to link to your phone for the first time. if it links automatically or you have already linked it then just let it do its thing near the back you will find a sectioned off aread and in the center it will have a raised button that is the talk / answer / redial button just forward of that there is a button (the one that you held to make it blink red and blue) that is the voice dial button the icon itself is just for on/off the two raised areas on the back next to the charge port are the volume buttons up/down respectively

Oct 04, 2007 | Lands Phones

Not finding what you are looking for?
Scala-Rider Cardo Scala Rider Q1 TeamSet Intercom Bluetooth Headset Logo

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scala-Rider Radio Communications Experts


Level 3 Expert

1658 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Scala-Rider Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides