Question about Sanyo Xacti VPC-HD1000 Flash Media Camcorder

Open Question

I NEED THE KIT OF FLEX OF Sanyo Xacti VPC-E1 - Sanyo Xacti VPC-HD1000 Flash Media Camcorder

Posted by Anonymous on

Ad

5 Related Answers

MNfisherman

Nate Stansfield

  • 11896 Answers

SOURCE: where do I find the software for use with sanyo

www.myacrobatpdf.com/.../sanyo-software-pack-75-for-digital-movie-camera-instruction-manual.html

search.wareseeker.com/sanyo-xacti/


Posted on Aug 25, 2009

Ad

Anonymous

  • 76 Answers

SOURCE: Short battery life when idle - Sanyo Xacti VPC-HD2000

Those types of cameras are no more really used... it is good to get a just normal cannon or sony camera... and you will be able to do wonders

Posted on Jan 14, 2010

Ad

Anonymous

  • 3 Answers

SOURCE: Sanyo Xacti VPC-E1W dispay is black, no image

Is the camera on and does it have batteris fully or half way charged?

Posted on Apr 09, 2010

Anonymous

  • 1 Answer

SOURCE: I am having a frequent problem with my Sanyo Xacti

im having the same problem w/ my camera. if you find the problem,would you email me the solution?
[email protected]

Posted on May 18, 2010

Anonymous

  • 3 Answers

SOURCE: FIRMWARE for Sanyo xacti vpc-hd2000!?

s_ustext_software.gif
leer.gif
Updating Firmware on Xacti HD2000

This page explains how to download and install the firmware update for the VPC-HD2000.

  • This firmware is for the VPC-HD2000 only. Please do not install it on another model.
  • By installing this firmware Greek, Swedish and Finnish will be added as new menu languages. (Please notice that for this purpose the menu languages Traditional Chinese, Simple Chinese and Korean will be deleted!)
    It is not necessary to install this firmware update when there is already the possibility of choosing Greek, Swedish or Finnish as menu language! Please check this before continuing with the update.
  • Before updating the firmware, please read through the explanations on this page.
  • Make sure to update the firmware in the order shown below.
  • The camera might not boot up properly if its power is turned off during the firmware-updating procedure.
  • Please read the accompanying licensing agreement before downloading this firmware. Downloading the firmware automatically implies your acceptance of the licensing agreement.
Requirements:
  • SD memory card (henceforth referred to as "card") with capacity over 8 MB.
  • Fully charged lithium ion battery.
  • Additionally, you need one of the items listed below:
    (i) A SD memory card reader (henceforth referred to as "card reader")
    (ii) A dedicated USB interface cable (shipped with the camera).
CAUTION
Be sure not to take out the battery during the updating procedure (this lasts about 60 seconds).
Avoid operating the buttons on the camera or closing the monitor unit during the updating procedure.


I) Preparing to update (copying the firmware onto a card)

Step I.1: Format the card on your camera*
  • Turn the camera on and set the "REC/PLAY"-button to "PLAY"
  • Press the "MENU"-button.
  • Move joystick to the left and select "OPTION MENU 3".
  • Move joystick to the right and select "FORMAT". Press the "SET"-button.
  • Select "FORMAT". Press the "SET"-button.
  • Select "YES". Press the "SET"-button.

    *CAUTION
    If you format a card, all images and data stored on that card (whether protected or not) are deleted! Please be sure to move or copy important images and data to a PC or to another card!
Step I.2: Download the Firmware*
  • The firmware can be downloaded here.

    icon_dl1.gif Firmware Update XACTI HD2000
    s313n081.bin (7.5 MB)
    *CAUTION:
    Please be sure to download the file onto a hard drive and not onto a removable location such as a card reader.
    The firmware file should be saved in a location where you can easily find it again later (e.g. save it on desktop of your computer).


Step I.3: Copy the file "s313n081.bin" to the formatted card (from step I.1):

The method of operation differs depending on whether you use a card reader (i) or a dedicated USB cable (ii).
(i) When you copy the downloaded files with a card reader: (1) Put the formatted card from step I.1 in the card reader. (2) Copy the "s313n081.bin" file created on your hard disk in step I.2 to the root directory of the card.

firmware_hd2000_1.jpg

(ii) When you copy the downloaded files with a dedicated USB cable: (1) Connect the camera to your PC with a USB cable and turn on the camera. When you connect to your PC, please make sure the camera's USB interface is set to "Card Reader". (Please refer to "Setting the Connection Mode" on pages 7 to 8 of the Instruction Manual in the Xacti Software CD 1.0) Please make sure the camera is recognized as a removable disc. (2) Put the formatted card (from step I.1) in the camera and then copy the "s313n081.bin"-file created on your hard disk (in step I.2) to the root directory of the card.

firmware_hd2000_2.jpg

(3) Remove the camera from computer.
Please read "Dismounting the Camera" on pages 9 to 11 of the Instruction Manual in the Xacti Software CD 1.0 for a description of how to disconnect the camera.

II) Updating firmware on the camera itself

CAUTION>:
Do not turn off the power during the updating procedure (this lasts about 60 seconds)!
  • If the power is turned off during the updating procedure, the update may not be properly completed and the camera may not start up.
  • To prevent the battery from running out during the updating procedure, please use a fully charged Lithium ion battery.
  • Do not remove the battery during the updating procedure.
  • Do not operate the buttons on the camera or close the monitor during the updating procedure.

Step II.1: Insert the card with firmware-update file (from step I.1) into camera

Step II.2: Turn the camera on and set the main switch to "PLAY".
  • The playback screen will be displayed.
  • If the camera is in SIMPLE mode, switch it to NORMAL mode.
Step II.3: Press the "MENU"-button.
  • The menu screen will be displayed.
Step II.4: Choose "OPTION MENU 3"

Step II.5: Choose "FORMAT" from the Menu Screen, but do NOT go into "FORMAT"

Step II.6: Move joystick to the left for more than 2 seconds.
  • The update screen will be displayed.*

    *No Update Screen
    If the update screen is not displayed, it's possible that the update file was not copied onto the card. Please refer to "Preparing to Update" to copy the update file onto the card and follow the updating procedure once more.
    If the main switch is set to "REC", the update screen will not be displayed. Make sure the main switch is set to "PLAY".
Step II.7: Choose "YES" and press the "SET"- button.
  • Updating will start.
  • During the updating procedure, the screen will show the message, "LOADING. DO NOT POWER OFF", and the access light will flash.
    Please do NOT turn the power off during the updating procedure! (this takes about 60 seconds).
Step II. 8: When the updating procedure is completed, the camera will turn off automatically.
  • Please remember to format the memory card once more before using it again.

Posted on Feb 03, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need Sanyo Xacti VPC HD1000 LCD


http://www.fixya.com/support/t1813324-lcd_video_camera_not_working

Apparently you can take the LCD apart, look at the part number and order it online somewhere.
Try shopwiki.com

Feb 11, 2013 | Sanyo Xacti VPC-HD1000 Flash Media...

1 Answer

Hello I have got camera Sanyo Xacti vpc - ca9gx. Recently i lost mic but camera still was recording but after while stop working. On the top is red light flashing but it is not starting. I have open the...


Think you have it about thin sheets like fcc flatcontactcable that can about problems with sun heat build up inside there are special hotmelt repairs something like this kind of fcc without tools very difficult . hope you can something do with it knowing that Sanyo was become a part of PANASONIC in 2008
How to repair Flex cable Flexible PCB type flat copper ribbon cable Sanyo VPC CA9 Xacti Camcorder 720p Quick Manual

Apr 23, 2017 | Sanyo Xacti VPC-CA 9 Flash Media Camcorder

1 Answer

My sanyo vpc-cg20 monitor shows updide down how do i fix it


http://us.sanyo.com/Cameras-Camcorders-Previous-Models/VPC-E1-Waterproof-Digital-Video-and-6MP-Photos

The above is a description.

I checked the online FAQ's and support, but didn't find an upside down image on monitor problem.

So, I think your best bet for your waterproof camera is to have it serviced by Sanyo.com.

http://us.sanyo.com/Customer-Support-Service-Center-Locator

Jul 24, 2010 | Sanyo Xacti VPC-E1 Camcorder

1 Answer

Sanyo Xacti VPC-E1W dispay is black, no image


Is the camera on and does it have batteris fully or half way charged?

Apr 09, 2010 | Sanyo Xacti VPC-E1 Camcorder

1 Answer

Need instruction manual for sanyo xacti vcp-hd2 camcorder


Assuming you mean the VPC-HD2, you can download the manual from the manufacturer's web site at
http://us.sanyo.com/dynamic/product/Downloads/VPC-HD2_OM_English-6327393.pdf

Mar 18, 2010 | Sanyo Xacti VCP-HD2 Camcorder

2 Answers

Need software pack and manual download for Sanyo


Where can I find the Sanyo Xacti MPEG-4 AVC manual?

Jan 25, 2010 | Sanyo Xacti VPC-S770 Digital Camera

2 Answers

SPLIT SCREEN PROBLEM


You can buy a new LCD and flex cable for $78 at the place Sanyo recomended to me. It takes a week for them to order it and a week to ship out. Call 1-800-421-5080 and give them part # 6450930331.

Mine has the same problem. I took it apart and by pressing on the flex cable my picture was restored. As soon as I let go the screen would go. Trying to decide between replacing the part or the camera.

Jun 02, 2009 | Sanyo Xacti VPC-E1 Camcorder

1 Answer

Help!! Sanyo VPC-E760 Digital Camera driver for Mac OSX


the driver is not separately available for Sanyo VPC-E760

Aug 06, 2008 | Sanyo Xacti VPC-S60 Digital Camera

Not finding what you are looking for?
Sanyo Xacti VPC-HD1000 Flash Media Camcorder Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Video Cameras Experts

Nicola Conroy

Level 3 Expert

1428 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Harrie

Level 3 Expert

6746 Answers

Are you a Sanyo Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...