At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I have a jacuzzi espree 536 model U640. The jets...
When a jetted tub will not turn off it is usually because the air switch in the motor has quit functioning. A new air switch for your pump costs around $20
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like the machine uses security-type fasteners, which require special screw bits. You may be able to remove the screws with one of these security bits, such as those sold by Harbor Freight.
I assume you hooked the hose back up to the air switch on the motor. There will only be a couple of things to check. Make sure you have a good connection with the air hose to the air switch on the motor. Sounds like maybe the air switch may be bad. The Air Switch is a latching air switch so if is broken then it won't latch when the air button is pushed.
Yes, I replaced mine from the top. It's fairly easy. You have to pop it out after you get the trim off carefully and then pull the air switch out remembering to get the 1/4 house to come out with the air switch so you can detach it and connect the new one.
you will have to look to see where the fitting is to install this heater. there are two styles of heaters they use (mostly) In-line pressure heater that installs after the discharge of the pump but before any of the jets. the in-line Vacuum heater installs before the front of the pump in the suction line.
Hello. yes you can replace the switch. All of the parts come with instructions. plus you can call the jacuzzi repair technician directly and have him/her talk you through the procedure at 866-905-2289. here is the owner manual in case you don't have one
Look behind the tub cover, it should have one. You should be looking for a GFCI it sounds like. These are the outlet that you generally have in your kitchen. They have a reset button and it just sounds like it needs to be reset.
×