How can i access to desktop - Apple iPod Photo MP3 Player

Does it make any noises? Does the display have any writing on it? What is happening? If you decide that you can't answer these questions, just throw the computer away and buy a new one.

Your IP address is probably closed or incorrect, Right click the icon in the applet and select "Repair" wait a few minutes, and it should correct this problem, if not, call your internet provider

Hello,

I will assume you are trying to connect to another desktop from the server... You may need to setup share properties on the desktop to access it from the network. If you are using VM software on the server and having this issue, you need to reconfigure the VM setting for your user access level.

Good Luck
C2S

check that the software related to that is installed properly. if it cant solve ur problem then u can install a new window and then install all the softwares again ok. it will solve ur problem

You need to set up sharing and network on the desktop.

Hi there have you tried to use the system restore command go back about a week before this happned and see if that helps you ok best regards mike

Probably your desktop background is locked.
To unlock your desktop do this:

Start >> Control Panel >> Display >> Then select tab "Desktop" and go to "Customize Desktop"
Then select tab >> Web >> Uncheck or delete the locked items.

This will be fixing your problem.
Don't forget to rate my help!
Thak you for using FIXYA!
Pablo :-)

Make sure mac filtering on router is not on and make sure computer are automatically getting ip address.

if need to access the device of your client,just follow the steps.

we take cd rom for eg to access.

1.right click the drive there you see "sharing and security"
2.click on the and enable share as cd rom.and give maximum allowed.
3.then from your system.Run->ip of the machine->enter.
4.it shows all the share file of the client machine

if want access remote desktop

1.enable the remote desktop connection in the remote machine
2.in RUN type MSTSC the remote desktop connection will popup.
3the type the ip of the client machine