Sony FD Trinitron WEGA KV-27FS100 27" TV Logo

Question about Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Remote control not responding

TV is stuck on 1 channel - cant use buttons on top of the TV to change channels or volume - remote control for TV has power but the only button that seems to respond in the power button to turn on the TV - it wont even turn it off......Ive tried unplugging it and plugging it back in - no good.....Ive taken out the batteries of the remote and put them back no good - - how do I reset the remote control ? maybe that will work ?? help fast - Im loosing it !!

Posted by alexander1 on

  • gladbag Apr 15, 2008

    i have a prima27'' it turns on automatically when you plug it in outlet stuck on one channel and volume wont work on the tv panel or remote???

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Perhaps you can try what I do when my KV24FV300 runs through channels and will not stop.  Hard to watch and remote will not work.  Nothing works but on and off from set. 

Sony Says:  Take all batteries out of ALL remotes that you use in any way for that set, VCR, etc.  ALL batteries out.  Turn TV off at set.  Unplug TV.  Wait at least 15 minutes then replace all batteries in ALL remotes.  Plug TV back in and turn TV on from set.

Maybe, just maybe it will work.  If it does not work why not call Sony, they always say that cannot happen but they have a solution for it.

[email protected]

Posted on Oct 26, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My rca is stuck on channel d9-1 and all buttons only control my volume please any answers

Try to unplug set and whatever is being used for signal from power, if set returns to normal operation you may have to delete that channel from the set memory.

Cable or Sat boxes can cause this issue by confusing the micro processor in the set.
1helpful
1answer

Hitachi 55vf820 problem

Most likely the buttons on the tv are stuck or malfunctioning, replacment of the button pannel will solve the issue
7helpful
1answer

Have Aiwa TV MODEL No. TV-A209 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck...

have Aiwa TV MODEL No. TV-A209
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
O6895H

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
000 001 1


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.
1helpful
2answers

Tv doesnt respond to buttons or remote

this is looking like a common LG problem our tv started doing this tonight
0helpful
1answer

Menu keeps flashing remote control wont work, cant change channel or volume.when i hold down channel up andmess with remote sometimes it changes channel. channel down button is only one that doesnt change...

U have 2 situations:
1st U have a tv Key stucked or internal control board defective.
2nd U have a broken tv remote control.

Note: Check for stuck pressed keys on TV, if not send to repair shop, for checkup.
44helpful
5answers

Aiwa TV MODEL No. TV-A149 AGING

I have Aiwa TV MODEL No. TV-A149
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
6EDEH

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
100 000 0


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.
0helpful
1answer

Remote control problems

Feed cable signal directly to tv(no BOX) activate auto-program for channel memory.
0helpful
1answer

Front controls mixed up & remote doesn't work

the channel down button is stuck on, you need to replace this switch internaly to the set.
Not finding what you are looking for?

300 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76835 Answers

Ekse

Level 3 Expert

13435 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

252 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...