Inserting bobbin case in necchi silvia maximatic 586

https://www.google.com search shows it for sale online:

https://www.ifixmachines.com/index.php/product/1615-necchi-sewing-machine-586-silvia-maximatic-manual

https://www.sewingpartsonline.com/instruction-manual-necchi-586.aspx

https://www.sew4less.com/product/603/Necchi_586_Manual

try these links for parts

Necchi 582 584 586 Silvia Service Manual

Necchi 584 Parts


Necchi Sewing Machine Parts drdanessmh com

Always raise the presser foot when threading the machine. This releases the tension disk so the thread will seat properly.

..

Parts are not provided here. Only advice and suggestions.

You might try searching the internet for your machine model plus the word "parts" Might also contact a local sewing repair shop who may be able to order what you need.

...

for a manual check with sewingpartsonline.com
sewusa.com

Your machine is not actually made by Necchi, it is a standard model that lots of manufacturers buy and have their own name put on, email me and tell me what the problem is [email protected]

if you have a snap in sewing table remove it first
at the bottom in front of the needle plate area is a bobbin case door
when you open it there is the bobbin case & also should be the feed dogs
always keep the bobbin area clean of lint or loose threads
take note of how the bobbin case is inserted in the bobbin area,, see where the thread tail is at on the bobbin case
then make sure the bobbin is wound correctly or it can cause sewing problems
reinsert the bobbin into the bobbin case the same way it's removed

I also have a necchi sewing machine, the base of your is like the base of mine, if you need a picture of inserting the bobbin,, send me a comment with your email address & I will send you a picture of the threading the bobbin case & inserting it

Is that all you would like, let us know?

oil it

www.sewusa.com for a manual and probably check/watch eBay for attachments.