Electrolux EW1000i Front Load Washer Logo

Question about Electrolux EW1000i Front Load Washer

2 Answers

Hi i have a electrolux ewf 1074 front loader. it has the padlock symbol up and the washing light is on although the last cycle had finished and the door is able to open and the start / pause button is flashing

Posted by bmckeone on

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

Press and hold the 'Delay' and 'Extra Rinse' buttons together and it will 'unlock' your control panel (this is a tamper proof feature for the kiddies)

Posted on Jun 11, 2009

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I just had do the load again ,but set it for22 min ,s them try this .Press and hold the 'Delay' and 'Extra Rinse' buttons together and it will 'unlock' your control panel (this is a tamper proof feature for the kiddies)See what happen,s OK.

Posted on Oct 22, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I replace the door handle on a electrolux front loader ewf 1074 washing machine

hi
you need to take the door apart to be able to replace the handle
is a easy job but remember the order you take it apart to be able to put it back on
0helpful
1answer

Our electrolux front loader Washing Machine EWF 1083 won't fill with water and there is a humming sound, does anyone know what the problem is ? cheers

Just a long shot - it may be the water inlet filter is blocked? normally there is a little mesh filter in the hose that screws onto the back - check that its not full of crap. This happened to me only a few weeks ago hope its as simple as that for you.
0helpful
1answer

Ewf 1074 sudden stop no power

I have the same problem "no power at all" when plug into the power wall inlet. No lamp on, display is blank/no led of 7 segments lit, nothing. The door can be opened and closed normally. Holding Delay and Extra Rinses buttons when power on the electrolux EWF 1074, doesn't help either. The electricity wall plug in is active. What can I do more ?
0helpful
2answers

Electrolux EWF 1074 - How do I turn off the annoying beeps at the end of every wash

I have touchscreen! Doesnt work. Any suggestions? Hate having to get up middle of night to turn off this )%(/₪/#&/₪(" beep!
0helpful
1answer
27helpful
1answer

Electrolux EWF 1074 get a lock icon

you need to hold the option and extra rinse buttons simultaneously for 6 seconds...you will see the padlock symbol go and then use your machine as usual
9helpful
1answer

I have a ectrolux ewf 1074 with the padlock symbol

you need to turn machine on and hold the option and extra rinse buttons simultaneously for 6 seconds, the symbol will go and you'll be able to use your machine again as usual
18helpful
2answers

Unusual display on panel (padlock) machine can't be programmed door is not locked however

i just went through the same thing.......you need to hold the option and extra rinse buttons simultaneously for 6 seconds, this will unlock it.....so turn the machine on and press the two icons, dont worry about the beeping and flashing after 6 seconds the padlock symbol will go and you can use the machine as usual.....i wish they put that 'minor detail' in the manual...cheers!!
Not finding what you are looking for?

2,161 views

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Brad Brown

Level 3 Expert

19166 Answers

nu267

Level 2 Expert

122 Answers

tina gallow

Level 2 Expert

149 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...