Question about Acu-Rite Adagio Clock Radio

1 Answer

The time display won't stop flashing

The time display in the base unit of the Acu-Rite Wireless Thermometer Model 754 is flashing. I replaced the batteries in the base and remote as per the instructions. Everything was fine, but after 12 hours or so the time flashes. It's the correct time, but I can't get it to stop flashing. The instructions don't mention this problem. Thanks.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Q: Why does the time on my clock flash?
A: A flashing display is an indication of low battery power. We recommend using fresh alkaline batteries. We do NOT recommend using rechargeable batteries or heavy duty batteries in any of our digital products. They are not designed for this type of use and may cause the unit to perform as a defective unit or not at all. They will also cause the display to flash 100% of the time.

Posted on Jan 16, 2010

  • growlmeow Sep 11, 2010

    Even after changing batters (new alkaline copper tops) the thing keeps flashing.



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Manual for model 00592txr

sending unit is too close , it needs to be at least four feet away from unit

Nov 11, 2014 | Acu-Rite AcuRite IndoorOutdoor Wireless...

1 Answer

How do I set the Clock on my Acu-Rite 00604RX

Hi Mona,

To set the time on your 00604 thermometer.
Press and Hold the Time button until the Hour begins flashing.
Release Time
Press and Release the + or - buttons to adjust
Press and Release Time and the Minutes will flash
Press and Release the + or - buttons to adjust
Press and Release Time to lock in your setting.

Sep 25, 2014 | Acu-Rite Acurite Wireless Weather...

1 Answer

ACU RITE Wireless Thermometer Model L5C0668TX cant set the date

I have misplaced the user manual for the
Acurite L5C0668TXACU RITE Wireless Thermometer Model L5C0668TX. Where can I get another?

Jul 19, 2012 | Acu-Rite Acurite Wireless Indooroutdoor...

1 Answer

How do I reset the time on my acu-rite model # 604rx

Hold the Time button until the hour blinks. When it does, use + or - to adjust. When correct, press Time again. This will cause the minute to blink - use the same buttons to adjust. When finished, press Time again.

Sep 01, 2011 | Acu-Rite Acurite Wireless Weather...

1 Answer

Acu-Rite Wireless Thermometer indoor/outdoor, the only identifying number I can find is inside where the batteries go, a sticker says: 0417. Question: 1) On the indoor piece, I can set the clock to the...

Before attempting to set the time, let the outdoor transmitter sync with the indoor receiver. Once that's done, you'll be able to successfully set and retain the date and time.

Jan 14, 2018 | Acu-Rite Acurite Wireless Indooroutdoor...

1 Answer

My acu-rite wireless thermometer model #00604RX isn't capturing the wireless sensor signal..both have new batteries and worked before changing old battery..reset the buttons

Double check the batteries and the direction in which they are installed. If there is one backwards in the sending unit that is outside, it will not send a signal. Also, there is typically one battery in the indoor unit that is responsible for receiving the signal from the outdoor unit. If all of the batteries are in correctly except that battery, you will see the display, but will not get the data transmitted from the outside sending unit.

Sep 18, 2010 | Acu-Rite Acurite Wireless Weather...

1 Answer

Acu-Rite indoor outdoor thermometer won't stop periodic beeping

There is no way to turn off beeping. From this site:
found solution - search for - Q: My wireless weather station periodically beeps, why?
A: .. unit's ability to detect a foreign radio frequency of another wireless unit when that unit transmits a signal. .. any wireless devices transmitting on a radio frequency have the potential to interfere with each other. Limit the amount of wireless devices to lesson the chance of interference. When beeping occurs, one device will need to be deactivated.

There is no way to turn off beeping, d/s designers forgot. I had the same problem, another external temp gauge showed up on the other channel, so my neighbor or someone is using the similar unit. MY SOLUTION: opened back of case and cut black wire to piezo speaker (at base if rear cover opposite side of stand-up prop) that creates beep. Don't use any sound features, ALL good now.

Nov 24, 2009 | Acu-Rite Audio Players & Recorders

Not finding what you are looking for?
Acu-Rite Adagio Clock Radio Logo

2,626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acu-Rite Audio Players & Recorders Experts


Level 3 Expert

13434 Answers


Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you an Acu-Rite Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides