Question about Sharp AR-M277 Black and White Copier

3 Answers

Printer busy/or error

I have 2 computers networked into a Lanier 5445. The copier function is fine, but the print function is not printing. Out of the blue my main computer would not print a document, said the printer was busy/error, so I went to the 2nd computer and it printed just fine but the internet connection was gone. I have the internet connection back, but now neither computer will print. I have tried to re-boot both computers and the printer, unplugged and plugged in the network cables. I even disconnected the internet and tried to print, but that didn't work either. BTW when I asked for my computer to investigate the printer network, it says that the printer is not pinging. I really don't know what else I can do. Thank you, Tammy

Posted by tfaith on

Ad

3 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 115 Answers

Sounds like your machine is using DHCP, not a static IP address?

Print your network settings from the Printer, then try to Ping from a computer on the network.

Check the Network setting of the machine, make sure it is set to a fixed (static) IP Address.

If this is the problem, you can go into your PC printers port and change the port to the reassigned IP Address of the machine.

If you reinstall the drivers then you will have this installed twice, one will work one will not, so delete it from the printers folder before you reinstall before you reinstall

Posted on Oct 25, 2008

Ad

pctech33

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 256 Answers

Hi,

The "network printer busy" error might be caused in a network printer due to printer spooler issues, presence of malicious infections like virus, worms, etc. in the system. It could also be caused due to corrupted drivers, invalid network name in the printer, and uncaptured printer port by the printer driver in a network, corrupted regional settings for your system. It could be also due to sending of large files to the printer by another user or due to corrupted documents in printer queue.

Posted on Jun 16, 2011

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 151 Answers

Check the network IP address of your printer and change accordingly in your pc Printer and Faxes settings. Or once again install your printer to both your pc.

Posted on Sep 28, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Develop Ineo+ 360 won't network print


are the paper tray matching the print driver selections what PAPER DRAW settings?? what are the print driver settings?

are the paper weights properly matching? what does the screen say when you send a print job to the copier?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Feb 09, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

I am out of blue toner and cant get any for a few days how can i contiue to use my copier?


You can set your print job to print with no color. When you go to print, there should be an options / settings tab. click that and set it to print black and white.

Jun 14, 2012 | Lanier Office Equipment & Supplies

2 Answers

Maint. reset for lanier ap-2610 printer


Hi,

Please go through the link mentioned below, it has all the details............

http://www.lanier.com/downloads/manuals/Printers/ap2610_printer_ref.pdf


Please post your feedback and Vote if the problem resolved as per your satisfaction.

Aug 11, 2010 | Office Equipment & Supplies

1 Answer

HP CM1312 on small office network.


do you have a printer server setup in the network,if so try restarting the server when it happens and see if the prints will print, check with your network administrator, the printer spooler might be at fault, also try adding more memory to the printer.

Mar 25, 2010 | HP LaserJet CM1312 All-In-One Printer

1 Answer

Lanier LD135. How do I program it to print


Envelopes thru bypass only....once they are set youl need to set the bypass to envelopes at the machine either thru user tools or by pressing bypass then the # key and selecting envelope or custom size and entering the size of your envelopes.
Back at the computer go into print proprties and select paper souce bypass the printdriver will use the machine settings unless ou tell it otherwise

Feb 24, 2010 | Lanier Office Equipment & Supplies

1 Answer

Lanier MPC 3000 copier won't print faxes


Try opening up your web browser and type in the ip address of your lanier.
You should to access the facsimile function located on the left side. Once youre in the facsimile function, you should see a thumbnail view of the faxes stored in your lanier. Simply click on the faxes and delete them.

Sep 22, 2009 | Lanier Office Equipment & Supplies

1 Answer

How do scan a item and send it to my computer


you need to have the scan option. the nic option . print option. you need the the machine being able to print. after that create a folder that is shared on the pc. get the name of the pc. on the machine browse the network, find the pc and search for the folder. this is the shortend version. now you can scan to the pc

Aug 26, 2009 | Lanier Office Equipment & Supplies

1 Answer

IMac connection to lanier ld122


Does this printer have the PS option installed? If not you will be unable to print even if you clear up the network issue.

As far as network goes is it currently connected and working with other PCs?
Mac printing is easily setup by typing the IP address of equip in the queue box upon setup. I believe the default queue name is "print" all lower case. If IP in unable to work properly make sure lanier has appletalk turned on and setup printer using appletalk.

Again if the machine doesn't have Postscript option you won't be able to print anything.

Hope this helps,

TankMurdock

Apr 23, 2009 | Office Equipment & Supplies

1 Answer

Lanier ld145 duplex error


The duplex is on the right hand side of the copier (external unit from the main print engine). You firstly need to check for a jam inside the unit, open the unit away from the copier and there will be a blue tab to access further beyond the black plates. Also make sure the unit is seated correctly and plugged in (Turn off unplug and plug back in, this will also reboot the machine). This is customer recoverable error so the reboot should fix it

Dec 26, 2008 | Lanier Office Equipment & Supplies

1 Answer

Unable to print more than 3 copies of anything


What error if any do you get? Sounds like your printer needs a firmware update.
Carl ( Lanier tech )

Oct 24, 2006 | Lanier 5222/27 Laser Printer

Not finding what you are looking for?
Sharp AR-M277 Black and White Copier Logo

3,821 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

k24674

Level 3 Expert

8091 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...