Question about Harman Kardon AVR 135 Receiver

1 Answer

My Harman Kardon AVR 135 6.1 needs repair

My Harman Kardon AVR 135 6.1 has a problem in its system power control. Power does not come in when I select the power button in the unit or thru the remote control. it is always in the standby mode. I don't know why, neither I didn't touch anything why it doesn't power on. My unit is just almost a year after my husband bought it in Dubai and I am here in the Philippines, I don't know where to get it fix since the brand is not coomon here in our country, that's why I seek for help from you. This unit is very expensive and I hope I can get some help or assistance from you even thru the internet what I must do about it. I already followed and do the trouble shoot guide from the manual. but still did't fix it myself. Please help me...

Posted by Donks on

  • Anonymous Aug 13, 2008

    same problem

  • Gil tenefrancia Aug 15, 2013

    Was your unit repaired?

×

Ad

1 Answer

Anonymous

You can bring your unit to Digital Dreams in SM North Cyberzone or in SM Megamall. They carry Harman Kardon brand and they accept unit for repair.
Hope this can help you.

Avamar23

Posted on Jul 31, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i factory reset my Harman Kardon avr 55 receiver

Troubleshooting Guide

Processor Reset
In the rare case where the unit's operation or
the displays seem abnormal, the cause may
involve the erratic operation of the system's
memory or microprocessor.
To correct this problem, first unplug the unit
from the AC wall outlet and wait at least three
minutes. After the pause, reconnect the AC
power cord and check the unit's operation. If
the system still malfunctions, a system reset
may clear the problem.
To clear the AVR 520's entire system memory
including tuner presets, output level settings delay times and speaker configuration data,
first put the unit in Standby by pressing the
System Power Control button 2. Next,
press and hold the Tone Mode 8 and the
FM Mode Selector ^ buttons for three
seconds.
The unit will turn on automatically and display
the RESET message in the Main
Information Display Y. Note that once you
have cleared the memory in this manner, it is
necessary to reestablish all system configuration
settings and tuner presets.


[email protected]
0helpful
1answer

How do i fix a noise problem on 6.1 avr 135 ?same trouble occur on alls channels,a high frequency sound disturbing listening.neither inputsi used(cd-dvd-tape)

There are many reasons this may happen, but without having the unit on the bench, it will be hard to tell. It may be oscillating, which would make that sound. I worked as a Technical Support Specialist for Harman Kardon. If you are interested in repairing your HK, please visit my website at audioserviceclinic.com. Thank you.
0helpful
1answer
0helpful
1answer

Harmon/Kardon AVR 146 wont stay on when hit power

Probably was damage buy a power surge, Internal damage to (Reciever)
1helpful
1answer

No sound regardless of input. front panel lights up and functions as per inputs however also noticed pwr supply fan and internal heat sink fan do NOT turn on. Any debugging tips appreciated! Thank You...

The power supply has to be on to some extent or it wouldn't light up.

http://www.retrevo.com/support/Harman-Kardon-AVR-335-Receivers-manual/id/386bh133/t/2/

Does it tune FM? That would indicate some life.

No sound? Is it Muted or a tape Monitor selected inadvertently?

Page 53: Reset the processor...

Processor Reset

In the rare case where the unit's operation or the displays seem abnormal, the cause may involve the erratic

operation of the system's memory or microprocessor.


To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the

pause, reconnect the AC power cord and check the unit's operation. If the system still malfunctions, a system

reset may clear the problem.


To clear the AVR 335's entire system memory including tuner presets, output level settings, delay times and

speaker configuration data, press and hold the Tone Mode Button (5) buttons for three seconds. The unit

will turn on automatically.


NOTE: Resetting the processor will erase any configuration settings you have made for speakers, output

levels, surround modes and digital input assignments, as well as the tuner presets. The unit will be returned

to the factory presets, and all settings for these items must be reentered.


If the system is still operating incorrectly, there may have been an electronic discharge or severe AC line

interference that has corrupted the memory or microprocessor.


If these steps do not solve the problem, consult an authorized Harman Kardon service center.

0helpful
1answer

Harman kardon avr 100 no power

check the fuses it help the power !
1helpful
3answers

Hi dear. how can connect my dvd to hamman kardon

connect tv video in to kardon video out (tv audio in to kardon audio out) dvd audio and video out to kardio audio video in. and if you what to record also signal from tv. make a cable from tv audio / video out to kardon audio / video in.
0helpful
1answer

Re: Harman Kardon AVR 135 My system was not in use for quiet some time and when I tried using it after a 2 year gap. I can find that the source is automatically switching to other sources. I tried...

The switching on this unit is done electronically via computer commands to the switching IC. I would guess that there is a problem with the power supply such that either the 5V line is too low (less than 4,4V) or that there is AC noise on the DC line. Any shop that handles audio equipment should be able to determine the problem with a few internal measurements. Typical parts costs for a repair of this type should be under $20.

Dan
1helpful
1answer

How to connect a microphone in an harman kardon avr 135

The only way is to get yourself a separate karaoke mixer that you can connect to your receiver, or get yourself a small two channel disco mixer
0helpful
1answer

Harman Kardon AVR 135 6.1....AUDIO DELAY???

This model does have a delay function. Programming is on page 19 of the user manual. Go to http://www.harmankardon.com/product_support/interstitial.aspx?sJump=ps&Region=USA&Country=US&Language=ENG select all products, AVR135, and get the owner's guide. If you have trouble with the link, then go to the Harmon Kardon site, and make your way to the support portal and then select all products.
Not finding what you are looking for?
Harman Kardon AVR 135 Receiver Logo

598 views

Ask a Question

Usually answered in minutes!

Top Harman Kardon Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76620 Answers

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

Harrie

Level 3 Expert

6746 Answers

Are you a Harman Kardon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...