The caller id is not working in my DECT 6.0
SOURCE: uniden dect 6.0 caller id light wiil not go out
I am not aware of any Uniden phone that has a "Caller ID" light. If you are talking about the small red LED on the top of the handset, that is a voice mail indicator and can be triggered by either a voice mail being held by your telephone service provider (Called Call Notes by some of the "bell" companies) or an unheard message on the telephones internal answering machine. Most of the time this is due to a voice mail on your service provider. If you don't think you have Voice Mail from your telephone service provider, call them and make sure, now days they include it with a bunch of other features without you ever asking for it. If you do not have voice mail through your telephone provider and there are no new messages on your answering machine, follow the Reset VMWI indicator procedures in your owners manual availible at http://www.uniden.com/index/manuals_results.cfm?cat+1
SOURCE: The square cursor button does not work on the uniden dect 2080
I fixed mine by using tiny pieces of tinfoil. Just take the back plate off (held by 2 screws under the battery cover). Then remove the circuit board (one screw on top). You'll find that the Square Button is in deed different, using 4 rubber contacts that apparently wear out. So, just cut some tiny pieces of tinfoli to cover each of the 4 black contacts. Glue them in place with a dab of silicone... Viola!!!
261 views
Usually answered in minutes!
×