Toner low ym - Minolta magicolor 2350 Laser Printer

If you replaced the developer unit then you already replaced the ATDC sensor. using third party toner or KMBS? if so use only KMBS

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace fuse chip in toner

recharge toner powder. 'BROTHER' toner powder is suitable for it.rate 100 Rs. only.

Hi there, A lot of the new Printer/Multifunctional/Fax Machines nowadays come out with only demo Toner/Cartridges which are not completely full so there average yield is very low. The average yield for your Toner Cartridges should be around 2500 Pages but this is a measurement when you basically print in draft and with toner saving on. The moment you start using colours more intensely the yield will drop drastically.
Regards,

there are two ways to solve it, first you could check on the connection. low connectivity may result to in ym disconnection. second will be uninstalling the ym in your pc and reinstall it back

the lazer unit needs recharging

Canon sucks. That is the answer. They want to make money off of you and want you to buy toner all the time even if you don't need it. It is called planned obsolescence and it is disgusting. They also make life difficult for aftermarket cartridges too. They don't make a lot of money on the printer itself so they make up for it by trapping you in a never ending cycle of buying toner!

All this means is that your toner is getting low and advising you before it is out completly the it needs replacing.

Please check if you removed the Plastic Tapes which is placed in the side lock of the new Toner Cartridge.

Take out toner and shake up down . And put it again. may it will help you . Else let me know.