Question about Konica Minolta BizHub C650 Copier
Posted by Anonymous on
I am unable to fix the problem C225B in Konica C450 please help me i have replaced all the tonner unit and Developer kit also.
Posted on Aug 26, 2014
SOURCE: konica minolta 2430
Most likely you received this message after a toner was replaced. Reseat the cartridge and restart the printer. If that doesn't work remove all of the toner cartridges manually and reinstall.
Turn off the printer and open the top cover. Follow the toner cartridge all the way to the right side of the printer (on the white part). You should see a hole that looks like a cross. Take a pen or key and push down on the black button in that hole. While you are holding it down rotate the toner cartridge towards you. You want to get the colored roller on the cartridge about 1/2in away from the metal bar that says "consumable reorder". You should be in a position to take out the toner. Let go of the hole and remove the cartridge. Repeat the steps until all of the cartridges have been removed.
Turn the printer back on at this point. You are going to get toner not installed messages on the printer. Open the top cover and the cyan tray will be in place. Shake the toner and install. Close the cover and let it cycle to the next color (black). Repeat the process until all cartridges are installed.
If you are still getting the error you either have a bad cartridge or the carousel that the toners sit in is damaged.
Posted on Jul 19, 2008
Check your bypass tray, the tray is on the right side of the machine, the tray flips out for legal and 11x17 paper sizes. Check that there is nothing jamed inside, code says that the tray can't lift. so check for anything jamed inside down there. As to reset the code open then close the front door where you put the toner. Turning the machine on and off will not reset the code. but open and closing the front door will clear about 80% of the service codes.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Posted on Jul 25, 2009
C13F0 - Laser error
The laser output exceeds the upper limit value.
The laser output remains lower than the lower limit value.
Posted on Aug 23, 2009
A 'print spooler' is a range of memory either internal to the printer (sometimes called 'buffer memory') or set aside from the RAM in your system.
A fatal error normally means the material you tried to print has been lost and must be sent to the printer again.
If the error continues to show up, you may have bad printer memory or perhaps the driver software in your system has gotten stepped on by the operating system and needs to be reinstalled.
Windows loves trashing files to keep life exciting.
This problem is not related to the drum or toner cartridge.
Posted on Oct 10, 2009
Tips for a great answer:
Mar 15, 2017 | Konica Minolta Office Equipment & Supplies
Feb 17, 2015 | Konica Minolta bizhub Office Equipment &...
Aug 11, 2014 | Konica Minolta bizhub Office Equipment &...
May 13, 2014 | Konica Minolta bizhub C250 All-In-One...
Apr 21, 2014 | Konica Minolta Office Equipment & Supplies
Jan 07, 2014 | Konica Minolta BizHub C650 Copier
Jul 31, 2012 | Konica Minolta Bizhub C350 Digital Copier,...
Jun 08, 2009 | Konica Minolta Office Equipment & Supplies
Apr 10, 2008 | Konica Minolta bizhub 350 All-In-One Laser...
3,245 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: