Question about Televison & Video

2 Answers

No power after watching tv all day saturday switched it off to go out for couple of hours came back in switched tv back on nothing dead no power light on checked fuse in the plug it was ok checked fuse inside tv thats ok to had tv repair man out today said probably power supply prob doesnt want to get involved in case he fixes power prob then switches it on then the tube fails any suggestions would be great

Posted by bawhead on

  • 3 more comments 
  • DocDale Nov 07, 2007

    replaced all swollen capacitor in the power suppl and got the red lite on front of tv to come on. Checked primary and secondary power sources and they are there momentarly then red light goes out and tv goes into shutdown mode. [email protected]

  • Joette Nov 13, 2007

    I turned off the TV and went to turn it back on several hours later, and there is no power, no light or anything. Is their a reset button? I have only had this TV for 9 months. Please help!

  • Anonymous Feb 18, 2008

    I switched it off to install freeview and 2 minutes later when i tried to switch it on there's nothing. no light nothing. If anyone knows how to fix it please help.

  • jlewis019 Jun 25, 2008

    turned tv off takes 30 min. to come back on and color is not right. last night it got turned off ,i turned it back on got blue light but still no picture. had it in a t.v. shop for 5 months he could not fix. help

  • Anonymous Mar 19, 2014

    Sharp tv power light will not come on at all Power switch ok



2 Answers


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bring your Tv to Micro Electronics
1515 Britannia Rd E, Unit 12
Mississauga Ontario, L4W 4K1, CANADA. ask them to chek it out, they are the best, they will let u know is it possible to fix or not, how much its gonna cost you, if its fixable and can get the parts you will get the tv in ur hand next day. call them 905-565-6595

Posted on Nov 11, 2007



  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

The problem is the power section Hot and Cold area. maybe you have defective fusibul resistors or in the oscillation circuit thats why your tv cant turn on automatically.

Posted on Sep 28, 2007


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tv turns itself off but power light is still on

Check for any loose contacts at the power plug point. If mains power inerruption takes place, this kind of fault can occur.

Jun 20, 2013 | Televison & Video

1 Answer

Jvc lt-z32s2 went dead and makes a static sound at back of unit.

check weather the power cord or component at the power supply board get burned.

Oct 02, 2012 | JVC Televison & Video

1 Answer

I was wondering if you had any insight. I just replaced the convergence chips on my HCL552W Samsung tv and after a couple of hours watching tv the next day it turned off and won't come back on. The power...

Double check for the known issues with capacitors. See if you have any that are swollen, bulging at the top or leaking and that will be the issue. You can order replacements and either have it done or DIY.

Jan 17, 2018 | Televison & Video

1 Answer

My Sony Flat Panel Display FWD-50PX2A : When I plug in my Sony the green light goes on a ticking noise appear and after a couple of seconds the red light goes on - neither the remote or manual buttons...

Unplug,replug tv back in an hour later.Tv now reset it self back to factory setting.Now it should work.Not,than the power supply board is dead.That the board,where the power a/c cord plug into it.Tries websites like, to buy a refurbish power supply board for the replacement.

Sep 13, 2010 | Sony FWD-50PX2 50 in. Plasma Television

1 Answer

I have a Digital Research LCD tv and for some reason the power does not come on anymore. I was watching it one day then turned it off. A couple hours later I went to turn it back on and nothing happened....

Try tv unplug,replug it an hour later.The tv will now resetting back to factory setting.The tv should work now.Not,than the power supply board is dead.That the board,where the power a/c cord plug into it.Tries websites like, to buy a refurbish power supply board for the replacenent.

Sep 08, 2010 | Televison & Video

1 Answer

I turn the power buttin on....after about five

When was the projection lamp last change?If the tv,projection lamp inside the tv at last change was 1/ 1/2 or 2 years ago,and the tv is on,an in use at lest 4 or 5 hours day.The projection lamp life,it over should be change the projection lamp.Now tv turn on LED light "LAMP" indication light up or flashes?Yes,the projection is dead,hear alot of clicking too?The Ballast board it also dead,should be change too.The Ballast board,this board job,it help to ignite the projection lamp.

Jul 23, 2010 | Toshiba TP61H60 61" Rear Projection...

1 Answer

Power button Flashes

Bad Convergence circuit , replace 2 STK392-110 & fuse will take care the problem

Jul 18, 2007 | Hitachi 43FDX15B 43" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6121 Answers


Level 3 Expert

85239 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides