Can i connect my tv thru a dell optiplex745 - Dell OPTIPLEX 745 PC Desktop

It sounds that the input connections to the set is poor. Check all the connections for tightness.

Run the S-Video cable from the laptop to the tv. Take the tv's remote control and hit the Select Input button. Select S-Video or PC as your input source. Reboot the laptop and the video might show automatically.

The video will show on most systems when you reboot without you having to do anything. Some systems will require you to hit the FN (Function key) + F1 thru F12. Hold down the FN key then hit the correct key for displaying on the monitor (F1 thru F12). The correct key will normally have CRT/LCD on it or it will have the icon of a display.

You have to have some sort of a modem to get online whether your using a smartphone through a usb or broadband modem through your rj-45 jack, Broadband modems also have the capability of using a usb cable to connect to the modem. Hope this helps. Not sure exactly what your asking. If I havent answered your question feel free to let me know!!!

Before you go to any more trouble troubleshooting potential hardware and/or connection issues, look at this page of reviews on Dell's site, taking special care to read 'Review 8' by an owner named 'Milwsport'.

i have connect to my laptop to the TV thru' 15-pin VGA video connector and change my graphic card setting. I have sendyou a snapshot of the setting which are similar to the laptop.

Your best bet is to contact dell on this one, they will have usually a bypass. Now if you want just t access the data, then you can remove it and place it as a secondary drive under Vista Ultimate and it will bypass the security of any os systems under it,

Most video cards on computers output progressive scan, and your flat screen tv may be interlaced. This would cause the horizontal hold to keep rolling.

You can connect it directly with a composite cable. There would be a RCA(yellow) video output on the back of your cable TV. This is then connected to Video input(yellow) f you projector.

If your cable TV has Component output (threr RCA cable Green, Red, Blue), then these thre RCA could be connected to the similar one available on your Projector.

You could connect your sound als o thru the RCA out of Cable TV and input of Projector. But if you have a good AV Receiver or a sound system then it best suited for it, since the projector speaker is mono and only 2Watt output.
Let me know if there are any specific inputs required
The Dell 2200 mp projector has the following compatibility
:HDTV: 1080i, 720p
EDTV/480p: Yes SDTV/480i: Yes Component Video: Yes Video: Yes Digital Input: No Computers: Yes

You will need a cord that plus into the headphone jack or speaker out jack on the computer and has rca end to plug into the audio input on the TV.It will look like the one pictured.Please rate this solution.

dear sir.

here u have to chek cable yr laptop is not support with a same s-cable u need to connecter for s-vadio to audio vedio connector and it's convort yr s-cable to comosite cable afer that it's automaticly dosply thru composet.... yeah one thing have to chek with different cable then selacet display propatise to set output setting is set in to s-video.. it's help u...:)


Thanks
please vote
jo_chinmay