The volume control doesn't work properly. - Pioneer VSX-D608 Receiver

No function when pressing the buttons or TFT Screen Check whether the radio antenna is inserted or properly connected ,Wipe the disc with a dry soft cloth or replace a new disc

For detail, please see remote control dual describe. 5. MODE Button. Press it to select the mode: Radio, DISC (if there is a disc in unit), USB
Do not turn on or off the product in short intervals. ... IR remote control operation may be hindered by.

Install an aftermarket volume control package like "Volume Control +" or if you have Root "AlsaMixer". These products allow you to set the "Master". Use one of the products to turn down the Master control.
Also, make sure the Volume Up is not jammed in the Up position.

Look for any jammed buttons on remote, any obstruction like a sticker or gum on the sensor on the TV. If you have such obstructions, the TV will respond only partially.

Hi there
I would try going into VOLUME through the MENU and find volume there and set it accordingly.
good luck
Kolbrun

Hello
Your remote control needs cleaning. Just go to this link and see the details. OK.
http://www.fixya.com/support/r10192276-cleaning_remote_control_handsets

check your hearing at the medical center

Thats Fn/F8 to control volume--"hotkeys" sequence

1. Make sure your Microphone is connected properly to the correct port (It's usually the one with the little mic picture on it at the back of your CPU)

2. Once it is properly connected, the system will automatically detect your microphone and suggest for you to download the necessary drivers needed. Do so to fully use your device.

3. If this still doesn't work, go to control panel, click on sounds and make sure that everything is set up properly (audio, mic in has volume, etc)

Clean the volume decoder, or replace it

There are several ways in which you can increase the volume.

First, the most obvious way is to use the volume control attached to the speaker unit itself. If that isn't working, there's also an icon in the lower right-hand portion of the task bar in Windows. Simply click the ^ button, select the icon that looks like a speaker, then drag that up to your desired preference.

If that doesn't work, click on Start, go to Control Panel, click on Sound, then search for your Speakers in the "Playback" tab. First, make sure it's set as your Default Device. There should be a green check mark in it. Double click on those, select Levels, then make sure Play Control is set to maximum.
If that doesn't work, then check the settings on your Sound Card. Make sure the wire going into the back is plugged in properly. You may need to update your sound card drivers. If you aren't sure who the manufacturer of your sound card is, you can find out by going to Start > Control Panel > Device Manager. The Manufacturer will be under Sound, Video and Game Controllers.

Once you have that information, you can go to the Manufacturer's website and update the Drivers. If this doesn't resolve the issue you are experiencing, or if you require more specific / additional information, simply respond to this thread. I'll be happy to assist you further.
Regards,

Aaron Busch
Senior Tech of LiveFix Support Services (LiveFix.net)