Try searching for your code . This unit might not have your code.
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control
after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV
2. Press and hold SET
until the LED
(red light) blinks twice,
then release SET
3. Enter 9
will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER
. Stop when the TV turns off
(after pressing POWER
). If the device does not have a Power
key, you can substitute another function, such as digits 0
, or PLAY
).NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:http://www.ofausa.com/remote_manual/URC4...