Question about Kenmore Elite HE4 Electric Dryer

1 Answer

My ht5 dryer will start and run it gets hot and all but it will suddenly stop the lights will flash and the the power shuts off like a completed cycle but the clothes are still wet. I just watched it run for about 7minutes out of 47 scheduled minutes. no codes and timer still shows time remaining, thinking door sensor or control panel.

Posted by Anonymous on

Ad

1 Answer

Chris Huff

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Kenmore Master
  • 6,289 Answers

Most likely a control issue. Will it come right back on after shutting down or does it need to sit a while?

Posted on Nov 03, 2017

Ad

5 Related Answers

Anonymous

SOURCE: Kenmore Elite model 110.63932101

There is a sensor bar usually two on the inside of the dryer either in the front where the lint trap is or in the back right corner u will have to take the machine apart to ensure that the wire is firmly connected to thsoe sensor bars that would be the first thing i would recommend u check symptoms are itruns for about ten minutes and cuts off and clothes are still damp but time cycle works fine.

Posted on Mar 20, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: Intermitten Heat up

I would like to thank the ones who responded to giving me a 'hand' in repairing my dryer. I did like you said & changed out the coils & now the dryer is working like it should.

Posted on Apr 12, 2008

Anonymous

  • 750 Answers

SOURCE: Kenmore Elite HE4 - Smartheat Quietpak9 ERROR CODE 4E

Buckeyw,

Huuum,at your service!

With an error code.
This can reset the system.
First unplug the washer and wait a 5 minutes then restart it.
It's like rebooting your computer when its acting strange!
Usually it corrects some error problems.
if they are not serious, or they are a temp glitch!




How old is the appliance?

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!


Bless You
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.

Thank You

Posted on Sep 18, 2008

JR JR

Johnny Ramirez

  • 116 Answers

SOURCE: Kenmore Elite HE4 Electric Dryer - heat but not drying

you have thermistor failure/ located inside machine reason for premature heat

Posted on Nov 30, 2008

Anonymous

  • 1 Answer

SOURCE: Kenmore 80 series dryer stoping after running for 10 to 15 minute

Start any cycle. Dryer runs for 10 to 15 minutes, then stops before cycle is complete. Start again, stops again in 10 to 15 minutes.

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shutting down power on my fridgidaire 2008 dryer that stops and lights start flashing


without make/model we have a real hard time looking for a solution

Mar 22, 2015 | Dryers

1 Answer

Dryer will run but will not heat and the lights all flash


Good Afternoon Friend,

I understand that your Frigidaire dryer, model# GLEQ2152ES, will run for a few minutes and then stop and display "AD" with the lights flashing. The "AD" means that your appliance was in an automatic dry mode. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jul 03, 2014 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Dryer is tumbling but no heat - when I reset it shuts off after about 10 min and the Drying, Cool Down, and Extended Tumble lights are all flashing.


Janet McDonald,

I understand that you are having trouble with your dryer not heating and not running a full cycle and shutting off with the Drying, Cool Down, and Extended Tumble lights flashing. What I suggest is to give your appliance a hard reset. You will do this by either unplugging it or cutting the power off at the circuit breaker for 3-5 minutes. After the 3-5 minutes, bring power back and try to start a cycle. If it does not complete the cycle and shuts off with the lights flashing, I suggest to either contact the manufacturer or a local appliance technician. This way you will be able to locate the cause of this issue and have it resolved.

-Best Regards-

Jan 14, 2014 | Frigidaire AEQ6700FE Affinity Electric...

1 Answer

Frigidaire affinity dryer wont run cycle it resets about 10 seconds after I press start, on top of this issue the power will no longer shut off. After the cycle stops all 3 of the lights near the cancel,...


Not 100% but there should be a way to reset computer using the controls on the dryer.
If you have the manual it should be in there or contact the manufacture you could get lucky they may tell you.
Regards Craig

Jan 30, 2018 | Frigidaire Dryers

1 Answer

Washer temp setting changes by itself


I also have a Whirlpool washer/dryer for my condo, although I don't know the model number of mine. I had the same problem -- after it was precisely a year old, suddenly one day the hot and cold started coming out reversed. I was able to fix mine by more or less temporarily fiddling with the water pressure. What I did was one time, when the rinse cycle was running and the washer was filling up with hot water (grrrr...), I completely shut off the valve supplying hot water. So at that point the water stopped filling into the washer, and then I started tinkering with the cold water, twisting the valve off and on a few times. Then BINGO, suddenly the cold water "kicked in" and for the remainder of the rinse cycle, it filled the washer with cold water. I then turned the hot water valve back on, and since then it has been running correctly.

Jun 05, 2010 | Whirlpool Washing Machines

1 Answer

Maytag performa just stopped in middle of cycle and won't start


If a dryer is not working at all that's not good! But it doesn't mean you need to go appliance shopping just yet. It may be something very simple like a bad door switch or even a broken door switch actuator, in a kenmore dryer there is a tab thats sticks out of a hole in the wall that allows the dryer to run only if the door is shut, other models may have button that protrudes out of the dryer and when the door is shut, this allows the dryer to run. These switches go out from time to time, also if a dryer is full of lint build-up over time this will cause the dryer high limit or fuse to blow. The fuse is located near where the blower is in most cases. When the air in the dryer gets way too hot the fuse/hi-limit will blow and the house wont burn down.

Sep 22, 2009 | Zanussi TD4112W Electric Dryer

1 Answer

Kenmore Heater continues to run when motor has stopped


It sounds like you have a grounded heating element. If the dryer can be turned off but the heating element continues to get hot, that indicates a grounded heating element. Be Very Careful. There could be power running thru the dryer case. I would unplug the machine and check out the heating element. Hope this helped and best wishes.

Aug 22, 2009 | Kenmore 63942 Dryer

1 Answer

Bosch WTMC3500UC gas dryer runs but does not heat


my dryer does not put out lint, rather thru the front.

Aug 22, 2009 | Bosch Dryers

1 Answer

Asko t702c stops working after about 5 minutes


If you continue to try to run the dryer after the automatic shut off kicks-in it will shut the cycle down with no flashing lights after the dryer reaches a critical and dangerous temperature. If the dryer is skipping immediately to this step without any flashing lights then call an Asko certified repairman as something may be wrong with the machine. If you have not tried cleaning the condensor, please do this as well. Remove the bottom housing of the dyer, move the two red handle to the right, and pull out the condensor unit. Wash it under warm/hot water using a bathtub or shower and you will see lint and dust come out by the heapful. Replace the condensor unit, wait about 30-45 minutes, and then try restarting your dry cycle.

Kevin C., Asko USA.

Jun 07, 2009 | Asko Dryers

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

240 Answers

Brad Brown

Level 3 Expert

18378 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...