My Bosch Axxis WFL 2060 does not start. Door latches but nothing happens. Same issue as posted here: http://forum.appliancepartspros.com/washer-repair/513208-bosch-axxis-washer-does-not-start-2-lights-flash.html#post832466 Has anyone else experienced this problem?

SOURCE: Is used Bosch Axxis WFL 2060 with door replaced a safe bet

not a bad price (poss a little bit high) but i would want to see it running on a warm wash first.

Mike

• 190 Answers
• Posted on Jun 03, 2009

SOURCE: remove bosch axxis 2060 washer motor

Remove the back panel to get to the motor which is at the bottom at the back. Notice two bolts holding the motor into the mount. Remove these two bolts. Notice the back part of the motor is sitting in the mount with black rubber washers. Carefully, pull the motor forward, and this will be abit hard. You can take a flat head screw driver and tap down (in between) on each front plastic washer and the motor will slowly come forward. Becarefull because there is a wire harness still attached to the motor. You have to take wire cutters and clip the placstic band holding the wire harness to the motor. Then grip the harness and wiggle it free. Then remove the single wire also. Putting the belt back is a bit tricky too. Make sure you put back the two black rubber washers and the two front plastic washers.

SOURCE: Replacement front door for a Bosch Axxis WLF 2060

Visit repairclinic.com. Enter your model number in the search box and it should call up the parts you need.You'll be able to see actual photos of the parts on size grids so you can compare with what your's look like.
I did a quick search and it looks like you're looking for part number 1046685 .