To configure f7d1401 v1 to access no-ip ddns - Belkin (F5D6230-3) Wireless Router

use windows microsoft internet explorer with low security level

Remote access setup is the same a with a PC. Each router is different but the apple versus PC issue is not. Once remote access is setup, you will access the DVR interface using the IP address you have chosen. If you need help setting remote access up, call us. We offer the service for minimal cost. If you want to do it yourself which can take hours and will possibly make you pull your hair out, then research your specific router model number and make sure you port forward the proper ports that your DVR or NVR asks for and insert them into your router firewall, pointing them to your DVR or NVR's local IP address.

if internet is not working.
u need to double check that u have the right username and pw inside the modem.
Ur ISP should be able to help

.Probably you need to set your router to port forwarding. Use these guides to help you learn how to forward ports for well known applications such as uTorrent and Minecraft, as well as any other application or program you would like.
Start by selecting your router manufacturer from the list

depend on what brand and type of the ip camera that you use.

in order to be able to access from internet:
- you need to use a router that connect to a switch and the camera
- the router must have UPnP Feature & Port forwarding.
- just in case your public ip address is dynamic, you will also need a ddns for redirection.

The basic concept is, you have to configure the network setting of the camera according to the router as a gateway.
usually, in the network setting, you will find a http port number.
change this number from default ( 80 ) to another number from 0 to 65535 ( example 50010 or 40000 , you can choose freely, it's recommended to use port above 50000 )

then find the portforwarding function in your router, then set the port number to the ip address of the ip camera.

if it's successfull, you can directly access the camera from the internet by entering your public ip address and the port number on your browser.

for example : http://itcomm-streets.viewnetcam.com:50001 << my ip camera demo unit.

try calling belkin

For configuration of entire belkin routers including basic (f7d1301 v1) router...
And also for resolving various issues related to belkin routers...

click here....

u need a public ip with an open port, and portforward the port with the ip of ur dvr

hh nnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Dynamic DNS (Domain Name Service) is a method of keeping a domain name linked to a changing (dynamic) IP address. With most Cable and DSL connections, you are assigned a dynamic IP address and that address is used only for the duration of that specific connection. To properly configure the DDNS feature follow the steps below: Step 1 Log into the web based configuration by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click on the Tools tab and then click Misc. If you have the DI-614+ with firmware 2.30, click on Tools > Parental Control. Step 3 Enter the required information under Dynamic DNS: Server Address: Enter the IP Address or domain name of your DDNS server (IE members.dyndns.org). Host Name: Enter the Domain name that you registered with your DDNS service provider, (IE mydomain.dyndns.org). Username Password Step 4 Click Apply and then Continue to save your changes.