Error 46 and says unable to clean. can u help me plz

my DCP 6690 printer causes problem unable to clean 46 how can i solved this ..............

brother dcp 195c 46 error

brother dcp-165c printer unable to clean , see troubleshooting and routine maintenance chapter in User's guide

To reset purge counter back to "0" then it will work again.

did you already fix it? my printer is also dcp 130 c... it says unable to clean 46


thannks

Hi. I had unable to print and unable to init 46 error. Any help available to reset my machine please. Thank you

plz search this forum for error 46 or "unable to clean". It has been written many times ;-)

plz search forum for unable to clean or error 46 it has been written many times.

...because you have run the cleaning cycles too much, the waist inktank is fed up! needs replacing. contact brother hotline or try to get one from a service partner which can be found on the brother homepage of your country.

- pull out the AC plug
- put back the AC plug while holding down the "menu" button and keep holding it (15 sec)
- now you are entering the MAINTENANCE mode and "error 46" pops up in the display
- select 8 by using the arrow buttons ,push OK and select 0 and push OK
- 00:00 00:01 OK (the display is showing this message)
- now push the MONO button 25 times until you see PURGE: xxxxx
- Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok
- the purge counter indicates now: purge: 00000
- switch off the printer ,switch it on
- ready to print