Question about ASUS P5RD1-VM Motherboard
Hey i just bought an 160 GB Seagate SATA HDD but after i connect it to my motherboard it's unable to detect it I don't even get it in the BIOS I booted from my WIN XP CD and it says no HDD atached Pl help :(
Check the SATA/RAID controller setting. It could have been set to [Disabled] Refer to your user?s manual for a detailed description on how to enable the onboard SATA/RAID controller by adjusting the jumper or BIOS settings. Regards SparkGap
Posted on Sep 24, 2007
Sata disk is not detect.and quit setup f3
Posted on Feb 25, 2009
How install win xp
Posted on Oct 26, 2008
Search XP Dark Ed. form www.katz.cd
Posted on Apr 06, 2008
Go www.katz.cd and find XP Dark Ed. and enjoy
Posted on Apr 06, 2008
Can you help me out from this problem.
I am using ASUS P5RD1 VM series motherboard and Samsung HD080HJ SATA HDD 80 GB.
My problem is that when i do switch on my PC it detects my DVD-ROM, CD-ROM and Hard disk but it does not shows it in Bios setup and during installation of Windows XP SP II it shows
"Setup did not find any hard disk drives installed in your computer."
In starting(when i Switch ON my PC) it shows DVD-ROM as Primary Master and CD-ROM as Primary Slave & SATA HDD as
3rd Master..IDE Hard Disk and it shows DVD-ROM and CD-ROM same as Primary Master and Primary Slave in the Bios Setup but did not shows any Hard Disk Drives. Moreover, SATA HDD is working properly on another PC and i am using only one SATA Hard disk drive in my PC.
I had checked it with both options in Bios Setup as "SATA Controller enabled/disabled".
Kindly suggest me with some solution to come out from this problem.
Posted on Apr 03, 2008
you need to go in bios and set sata to legacy for no F6 driver. if its on native it need a driver from floppy on xp cd boot . if its not detected in windowws as a slave. u need to run diskmgmt.msc and fin the unalocated drive and create part then format it ntfs
Posted on Nov 05, 2007
SOURCE: raid problem
Windows XP does not support SATA you need to load the SATA drivers from the motherboard manuf. You should have a cd for RAID/SATA drivers. When you boot off the XP CD it give you an option to load third party drivers watch at the bottom of the screen. When you see this message you can insert the CD that contains the drivers it is looking for the you should be able to load Windows XP.
I hope this help. Please rate.
Posted on Feb 18, 2009
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: