Genie Company GV150 Wet/Dry Vacuum Logo

Related Topics:

A
Anonymous Posted on Oct 09, 2013

Model no. 125.17608 craftsman 8 gal wet/dry vac is

Model no. 125.17608 craftsman 8 gal wet/dry vac is blowing instead of suctioning

3 Related Answers

Anonymous

  • 10319 Answers
  • Posted on Apr 13, 2010

SOURCE: Where can I fet parts for a Genie SV300Q wet/dry

Depending on what parts are needed Home Depot for instance carries parts for these

Ad

Anonymous

  • 1 Answer
  • Posted on May 01, 2010

SOURCE: how to set up wet dry vac for water pick up

you take the filter off and empty it.

Michael Vincent Cruz

  • 868 Answers
  • Posted on Sep 07, 2011

SOURCE: I have a 10 Gal

Hi,
Here are links where the hose can be purchased.
The parts for this Model seems to have been discontinued, but there are some that still sell the part, check the link provided to get more details of the part needed, thanks.
Link1 Link2 Link3

I hope the link help, I saw the hope on Link3 and Link2, on Link1 is where the original part can be bought but has been discontinued in the market, I put the link just for details on what the original part would look like to be able to buy one that the same from the other 2 links.
Have a nice day.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Kubota 14.5 gal Wet/Dry Vac not sucking or blowing

The hose can be flushed out using a garden hose. The problem with wet vacs not sucking into the bucket is the float ball sticking. It rises and seals when the bucket has reached its fill level. This stops water reaching the motor.

1helpful
2answers

My very old 6 us gallon wet-dry shop vac now blows instead of sucks.

connect the hose on the other end where it say vacuum not blow.
0helpful
1answer

Where do i place the foam sleeve for 5 gal craftsman wet vac

The foam just is put over the round center beneath the top of vacumn with top off the bucket. Just slide up to top of round assembly and you good to go. If you have the paper bag filter on remove it first.
0helpful
1answer

Wet vac wont turn on

That Model of Shop vac often has on/off switch failure.
0helpful
1answer

My rigid shop vac 4 gal 5.0 WD4070 wont start

Check elecrical connection, or switch may be bad.
0helpful
1answer

Trying to vacum and it starts to blow

There are two outlets on a shop vac one to blow and the other to vacum.
0helpful
1answer

I have an old shop vac floormaster wet & dry vac, 8 gal., model 700c. I need the users manual to find out how to use it as a wet vac.

http://www.hammerwall.com/Download_Manual/16114/
GO TO THE ABOVE ADDRESS TO GET YOUR MANUAL.
REGARDS.
PLZ RATE THIS
Jul 04, 2011 • Vacuums
0helpful
1answer

I have a craftsman 2 gal wet/dry vacuume & after using it for a wet pick up without a filter, it blows dust out while vacuuming and is extremely loud. Any suggestions. I took it apart and unclogged...

It sucked up some of the muddy water into the impeller while you was using it. Then it dried out and turned to dust. After you get done using it for wet pickup take a water hose and let a little clean water **** into the impeller, with it off the tub. That will clean it then let it run till dry. That will keep it from getting moldy also. And always put a filter on before using for dry stuff. They make a universal filter that is like a satin bag. That is what I use instead of paper one. Even for water.
0helpful
1answer

Craftsman 20 Gal Wet/Dry Vacuum model number 17762

you did take the filter off before useing it wet didnt you make sure the check ball in the filter housing is down in the cage and that the top is locked down properly
Not finding what you are looking for?

227 views

Ask a Question

Usually answered in minutes!

Top Genie Company Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Genie Company Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...