Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

Frigidaire affinity king-size capacity washer

My washer will spin one way but when stops to spin other, it will not go and the water will not drain and now finally the front control panel will not light up. you push a button and nothing happens like no power when plugged in

Posted by bwegiel on

Ad

1 Answer

Anonymous

My washer is not spinning the water out.what could be the problem?

Posted on Jan 21, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front load washer will not spin on the final spin cycle. Washer spins in wash and rinse cycle spin. Cloths are still soaking wet.


I appreciate your post, Rachel Kovach!

From my understanding your Frigidaire frontload washer is not spinning the final spinning and the clothes are still wet. If you washer is overloaded it will not spin properly to release the water out of the clothes. Also, a small load will cause your washer to not spin properly. You should additionally check the drain hose to make sure it not kinked or twisted that could cause your improper draining. If all that checks properly it could be an issue with your drain pump, motor, and control panel. I would suggest consulting with a technician for proper diagnosis and repair. This will help avoid unnecessary part purchases. -Matt

Nov 19, 2014 | Frigidaire Washing Machines

1 Answer

Started filling, made a loud noise, stopped filling immediately, door wouldn't open. I tried everything to get it to open. Running the spin cycle finally got the door open at the end of the cycle, though...


The washer drain the water if you put on spin. all electronically controlled washer won't unlock the door and or spin if there's water inside the water has to be drained out first.If the basket didn't move(no motor movement) and it finished the cycle, POSSIBLE problem is the motor control board. Motor Control Board 00436461

Nov 22, 2017 | Siemens WFXD5200UC Front Load Washer

1 Answer

My washer will do the final spin


You will need to replace the "control board" in the unit. Here is the part to order.




The part comes with a 365 day, any part, any reason return policy.

Nov 21, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

How to reset my washer, I am having problems with the washer, it does not want to spin on the final cycle; however it does wash. what could possibly be wrong and how can I fix this?


Please remove power for a while and allow unit to drain out the residual voltage so as to reset. Now press down the start /stop buttons prior to plugging the unit. Select a different program and see the timing of the water low into the inlet and in the drain cycle. If you notice that the flow is low then clean or replace the inlet valve, check the water level controller to stop inlet flow and start wash and finally the drain and refill for rinse spin. if not there is an error in the program for the refill and must be checked on the drain and level controller.

Sep 27, 2011 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Washer is not completing the spin/drain cycle. Stops spinning and draining.


does it drain out all the water? after it stops or is there still water sitting in the tub?

Mar 22, 2011 | Kenmore Elite 45986 Front Load Washer

1 Answer

My washer won't complete the final spin cycle. It goes through the wash and drain OK but won't spin, clothes are soaking wet. I removed the drain pipe and made sure it was not blocked, also removed and...


Hello, problem here is the spin control board is bad. Remove panel under the door and you can locate the spin control at the rear right of the machine screwed to the floor. Replace it and you will be all set. Mike

Nov 09, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Front loading washer won't spin


my amana washer wont spin and does not drain

Sep 11, 2009 | Kenmore Washing Machines

1 Answer

Control Lock


Does water remain in the washer after the final spin?
If water remains in the washer after the final spin, then the door will not unlock. Drain/Spin or Spin Only to remove any remaining water from the washer. The door should unlock at the end of the cycle.
Is the door locked and the Add A Garment light on?
If the Add A Garment light is on, then the washer door will unlock after the Pause/Cancel button is pressed once. Pressing the Start button will restart the washer at the same point where it left off in the cycle.
Is the door locked and the Add A Garment light off?
If the Add A Garment light is off, then the washer door will unlock after the Pause/Cancel button is pressed twice. The door will not immediately unlock while the cycle is running due to a possible high-water level in the washer, high-water temperature, tumbling or spinning. It may take up to five minutes for the washer to stop spinning and draining before the door will unlock. You will hear the door click when it unlocks.

Dec 19, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Frigidaire frontloading washer won't spin at all


Have a GLTF2940. Error code E20 and E30 came up. Will not drain and spin.
What to do?

Jul 27, 2008 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

372 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...