Question about LG WM1814CW Front Load Washer
Ue error code
For "ue" an unbalanced load is sensed three times, re-adjust your load in the machine.
For e1, it could be a water sensor problem. Check to see if the inlet valve is okay and not clogged, water shd be in good pressure. If this is okay, open up behind after taking the plug off the wall. There is a thin tube coming from the switch area to the outlet pump area; disconnect this from the top carefully and blow into it, it should be free; if it is clogged you will hav a water level problem. Unblock and refit carefully.
Posted on Nov 25, 2007
I just read on the LG home page about the UE code (I did put a small fleece jumper and a pair of winter gloves in the machine and got this code).
On the page it sais that the code means that there is an unbalance in the machine. Just try to put more small items in it an start again.
In the manual they give the example that if you just put a bathroom rug or a robe in the machine it may give unbalance and the UE-code.
Posted on Jan 06, 2010
You know what works great for a LG washing machine that gives an UE error the whole day.
You pick it up as high as you can and then let it drop on the cement. Works great now. No more error UE.
I must say I feel much better now. No more strees because of this UE error.
Tomorrow I will look for another make that work all the time.
Posted on Apr 10, 2008
When I am washing items on my LG washer that I know could potentially cause a "UE" condition I set the "Spin Speed" to "Low"
Posted on Aug 27, 2012
It could also be that the washer is not level. Make sure it is reasonably level and does not wobble, and try it again.
Posted on Nov 29, 2014
In this moment i have the same error with a samsung washing machine and i don't know what to do..it seems that i should leverage the machine but it is locked and i can not open it until the spinning is not finished..do you have any idea???
hope sbd sees this...
Posted on Feb 16, 2010
Samsung error code DE
Posted on Sep 21, 2008
UE is Imbalance error..Redistribute the load or you may have tried to wash something which will not 'spread' enough to balance the load...Nomess
Posted on May 18, 2010
Tips for a great answer:
Usually answered in minutes!