SOURCE: My Sony KDL-26S3000 won't turn on it well get stuck in standby
Please see the troubleshooting chart, BU1 board part # A-1268-869-A, cost approx $230.
SOURCE: My Sony Bravia KDL-26S3000 won't turn on and is stuck in standby.
Hi,
There is a power fault with one of the PCB's inside, contact Sony if you are still in warranty, if not contact a Sony service center as it will need an engineer to open it up to repair it.
Thanks
SOURCE: help my sony bravia just today got stuck in
When I power my Sony lcd 42 inch the red light blinks then I push the power button the green standbye light just continues to blink, any suggestions
SOURCE: Sony KDL-26s200 LCD 3 blinks from
Hi,
KDL-26S2000 belongs to WAX2 chassis and 3 times standby light blinking shows following error:
DC_ALERT1 as it is shown in service manual.
Following voltage has some problem or missing towards trident chip on main board (trident chip is main processor)
(D3.3V/ D2.5V/ D1.8V)
I'm not sure about your expertise, so in simple terms, replace main board of tv to get it fixed.
Let me know if you have additional question.
Thanks.
SOURCE: Sony Bravia KDL-40S3000...standby red light blinks
There may be no horizontal ouput, Check C515 & 516 and the jungle IC, IC206.
Hope that helps
431 views
Usually answered in minutes!
×