The reason why it cannot be ejected by software b'coz the pin that is used to eject it was broken.but you can manually eject it by using a twiser or if not you may open the device carefully and pull out the broken card.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I use a Fujifilm M 2gb xd card in my S5600.
As a rule I stay with fuji xd cards because I, and a few other people, have had some previous issues with Olympus cards in Fuji cameras.
Some compatability issues have occured with software. Some times they work and then fail with out notice which is a bummer when you want to use it.
Also not sure as to the firmware updates on this model to allow for newer high capacity memory cards
You'll need to install the software that came with the camera onto your computer then connect the camera with the USB cable that came with it to your computer. The software will start when it senses your camera is connected and you'll be able to access the camera internal memory. Otherwise, you can copy the internal memory contents to the memory card from the camera itself from the menu system.
Sounds like the card might be corrupted, (broken software). Try another XD card in the camera then in the PC. If it's an old card, they can wear out if used a lot or over a long time. There are also rare occasions where a new one can be faulty.
there is unfortunately no (easy) way to upgrade something like that...you'd probably have to actually tear it apart. but, maybe fujifilm might have released a firmware update to fix that problem *not that they would* but you could try plugging in the camera to your computer and try downloading firmware for it, they should have it on the website.