My lyra the player is displaying a message saying "please upgrade! what does this mean

Go to the website and check for most recent firmware. go to support icon and press the update firmware button and then follow the guided instructions!!
YOUR WELCOME

Just Google the internet with "RD2840 firmware download", download the firmware upgrade .exe file, and follw the instructions in upgrading the firmware of it.

Part of the proces is to restablish all the necessary files.

Best regards,

I have upgraded my RCA Lyra 1080 and show music files on the Lyra Window in my pc, but when I attempt to play music on the Lyra it says "no music files."

I NEED THE SOFTWARE FOR A RCA LYRA RD2762B MP3 PLAYER, IF SOMEONE HAS IT CAN YOU PLEASE HELP ME OUT. PLEASE SEND THE INFO TO [email protected]

I think the problem is that you deleted one of the syst. file on the RCA Lyra.. These are the files you need to have in order to make the mp3 player work.

Setting.dat
Music.sec
Time.dat
music.lib

and the 4 folders (Voice) (line-in) (FM) (audible)

Had same issue with mine, right out of the box!  I called support, they sent me to some 3rd party support company...  That place told me to return to vendor.   Thompson Support.  They basically just tried going to the RCA website, found nothing there, and finished up with return to store...

mp3 player says the file system is corrupt

1. Reprofile the MP3 player.

2. If does not work the above, get the firmware update file in the web and update your mp3 player.

Best regards,

If you mean upgrading the firmware, use the Lyra software that was installed on your computer. Just right click on it, and select "Check for firmware updates." You can also go to rcaaudiovideo.com and search for firmware for your Lyra there. Hope this helps!

this is the best solution you have update your lyra rd 1080/rd 1090 for download the updating click her http://download.rca.com/download/RD1080_90FWUpgrade_v4.26.exe and after instaling this update follwo instructions provided below ? To update your Lyra RD1080/RD1090, make sure you have it connected to the computer via the included USB cable. You will need to make sure that no external memory has been inserted and the Lyra RD1080/RD1090 display reads: "USB Connected Int. Mem". (If it does not, please refer to the users guide for the section on how to switch between internal and external memory.) ? Once connected, locate and run the Lyra Systems File Update Utility if it didn't open automatically. Installshield Wizard will have automatically created this icon on your desktop as well as under "Programs", "Lyra Personal Audio Player", "RD1080/RD1090" in your START menu. ? Click the "Refresh" button until the RD1080/RD1090 player shows up under device. ? Once displayed, highlight the drive letter by clicking on it, and click the "Update SYstem Files" button. ? When successfully completed, you will see the message, "The Lyra Personal Audio Player Device system files were successfully updated." ? Click the "OK" button, and then "Done". This will close the Lyra Systems File Update Utility. ? Disconnect the Lyra RD1080/RD1090 from the USB cable, turn the unit off and back on.