Microtalk hl200p how to set power saver mode?

the ones I have came with their own charging stand cup bases & rechargeable batteries, they are impressive radios as compared to others I have & they have NOAA channels as well

It's because the designers thought you wouldn't trust that the battery saver function if it didn't flash or otherwise tell you it's working, I think it's directed toward the small child market.

If the battery charge level drops to low levels, the phone automatically activates Power Saver mode to conserve battery power until you can recharge it. You can set the phone to activate Power Saver mode at 10%, 30%, 50%, 70%, or Never. Touch Apps Key > Settings > Power Saver . The Power Saver mode icon is located in the Notifications panel. When the battery charge is low, a notification is displayed prompting you to turn on Power Saver.

Power saver modes on the monitor has several functions. First the power saver preserves the devices from consuming current while viewer is mometarily away. Screens that display power saver modes returns to regular viewer mode soon as the remote controls or buttons are manipulated slightly as indication of request to regualar views. The power saveer mode of the screen can be disabled. Obser ve the feature functions of the device iether on the remote controlof device buttons. Power savers perform simialr to screen savers or device feature manipulations. Access the devices settings or menu buttons to display the entire list to buttons for disactivation of power savers modes. Usually the power saver mode may be onsctruting viewer experiences for situation that momentary displays ate idleness requiring to retore to viwer display screen. Refer to the devices userguide to attain details.

Power saver mode for mobile devices are usually activated from the settings pane of the mobile device. go to your device setting and select power options from here you can turn off power saver mode permanently.
Hope this solution has been helpful?

The power saver mode is a Lexmark X5650 feature that allows you to save electricity when the printer's not being used. That can be configured in the Device Setup in Settings. Adjust it on how long you want the printer to stay on before going on power saver mode but it can't be turned off. When the printer is on power saver mode, press and release the power button to power back on. Hope this helps.

I couldn't locate information specific to your model, but on most of the Microtalk radios you push and hold the MODE/POWER button (may or may not be labeled MODE) to turn the sets ON and OFF. This is normally the top button to the right of the display.
BillB

change the setting in the screen saver option (Power)
or look in Power in control panel...also check the hybernation time

Hello horndog78,

Your radio may be locked. You can confirm this by looking for a icon of a padlock on the screen.

To toggle the lock on and off hold down the LOCK/MODE button for a full two seconds until you hear a double beep.

Best Regards,
Ken
Go Ahead. Use Us.