- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually, the connect procedure for Labtec is, that you press the small connect button on the receiver, (which on some models, then starts blinking).. Next, you press the connect button, on the bottom of either the mouse, or keyboard.. then repeat this, for the remaining unit.
Note: You might have to connect the PS2 receiver BEFORE starting the PC, and also might have to install the drivers, to get the multimedia-keys to work ! Good luck!
There is usually a "Connect" button on the devices (Mouse & Keyboard) and on the receiver the unit connected to the computer. Hit the "Connect" button on the receiver then the ones on the Mouse and Keyboard.
Here is the sequence to connect keyboard and mouse to receiver:
Press Connect button on receiver, and within 10 seconds press the Connect button under the mouse. Wait 15 seconds. Then press the Connect button on the receiver and within 10 seconds press the Connect button under the keyboard.
Push the connect button on the wireless base, then push the connect button on the keyboard or mouse, that is supposed to reconnect the device. Make sure the wireless base is close enough to the keyboard.mouse, and nothing metal is blocking the path between the keyboard/mouse and the base.
Could be radio interference from somewhere. I tracked my similar mouse problem down to emissions from the ethernet adapter that connects over the house mains wiring. Try the using the mouse close to the receiver, if it works ok interference is likely.
once you have switched pc you will need to re-sync the wireless keyboard and mouse with the new pc, because although you have switched pc the keyboard and mouse do not know this. there should be a reset/resync button on the bottom of both the keyboard and mouse
×