Platen Replacement Lathem 2121? - Lathem Time Clock; Manual, Model 2121

The 'Tru-Align' feature may need calibrating.

https://www.google.com/search?q=lathem+2121+time+clock+not+printing+minute+data

..

If it is a Lathem brand, you can go to their website and they have the manuals for them on there. I found one for my 7500E. I think your model is very similar to mine. Here is a link for my manual. Please see if it helps you any.
http://www.lathem.com/media/92694/7500e%20manual2.pdf

send it into Gateway Time Systems in Pittsburgh...they will replace the ribbon, clean and lube it, and make sure the program is up to date for you. they did a wonderfull job on my company's time clock and they barely charged anything. i found them @ www.shop.gatewaytime.com good luck :), Adam

send it into Gateway Time Systems in Pittsburgh...they will replace the ribbon, clean and lube it, and make sure the program is up to date for you. they did a wonderfull job on my company's time clock and they barely charged anything. i found them @ www.shop.gatewaytime.com good luck :), Adam

First off, I did NOT have a lamp issue! All I needed was a product "manual" as I could not find the one the company used to have. Secondly, there is no problem to solve; if I would have had the manual, I could have hooked the device up myself.

Thank you for NOT helping!

this post is for projectors, not clocks. sorry.

http://www.lathem.com/support.aspx

Try this site.

gold medal products co.
800-543-0862
10700 medallion dr
cincinnati,oh 45214
www.gmpopcorn.com

yes it does mean that. send it into Gateway Time Systems in Pittsburgh...they will replace the ribbon, clean and lube it, and make sure the program is up to date for you. they did a wonderfull job on my company's time clock and they barely charged anything. i found them @ www.shop.gatewaytime.com good luck :), Adam

This site doesn't have much in the way of Lathem clocks or support. Go to http://support.lathem.com for assistance.