NO POWER in my digital camera

Did you remove the USB cable? As long as there is an USB cable in the camera, you can't power it up.
Then you still have to check if the battery is still in good order. Batteries do have a limited time of life. And you only can be sure it is charged, when it works in another (same model) camera.

Hi,

I believe this post will help you out..
Please CLICK HERE

How about cleaning the battery contacts in the camera first with a pencil eraser and then, with a cotton swab lightly dampened with rubbing alcohol.

Check previous post " Camera does not switch on"

It could be a number of things. The first thing you shouild do is remove the back cover and check for loose screws. If you don't find any, the problem may be a damaged battery door switch, a damaged memory card slot door switch, or worse- it may be a defective power board.

hi, I think your lens got damaged..I suggest u to try a service centre.U got to replace it..
please rate my suggestion..

The first thing to check is that the card door and battery door are firmly closed - press on them while the camera is on to see if it powers up. If not, there's probably a blown fuse - it will have to go to the shop.

Change out the CR2016 3V battery. You have to remove the rechargeable battery to get to the CR2016. Refer to the manual for proper instructions.

Had the same issue with a two year old camera. This solved my problem.

have u changed the PAL or NTSC seting ? u can find it in video system in the last seting menu