Question about Motorola Mobility RAZR V3

2 Answers

Black screens razr v3

Help! when i let my phones battery go dead and tried to recharge, neither screen would come up.the phones keypad will light up and you can hear the power on tune and can make calls but no display at all????????? thanks, smokeyjoe

Posted by joe marechal on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

Hi, Same problem as others are having. Check the Sep 30th solution that I submitted regarding opening the phone and sqweezing just to the left of the camera lens between the vol up/down and the lens The ribbon cable comes loose in that area, this technique usually restores operation to normal. Good luck.

Posted on Sep 30, 2007

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Try this, remove the battery and clean the batt terminals, then leave the batter out over night, then try again to recharge in the morning...

Posted on Sep 20, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Motorola RAZR V3 LCD SCREEN went blank - black screen

The LCD flex connector is very sensitive. 4/5 of the RAZR screens I see go out are due to a loose flex connection. It's super easy to fix it. Take off the battery door. There are two T6 screws. Take them out and pop off the bottom of the phone. There are two flex cables: one for the keypad, the other for the screen. Connect the flat cable (screen cable) first. Then connect the bent (keypad) cable. Put back together. Voila.
0helpful
1answer

Black screen on motorola razor v3

I am glad I could help. I would appreciate it if you would rate this please. thanks...
0helpful
1answer

Motorola RAzr V3 - screen went black but key pads lights up

replaced the flexcable on the phone to have it fix
0helpful
1answer

Motorolla razr, black oldest edition

try another battery and if the lights just blink briefly....your main-board sounds like it is damaged so you may need a new one.
0helpful
1answer

My V3 keypad is not responding

probably your flex connector get loose or defective... if you can open your fone try to check it... if not, just visit your service center..
0helpful
1answer

Razor phone

if the keypad only lights up for a about 1 second wen trying to switch it on u may need to reflash the cell, trying holding down * and # then press the power button while holding them down... if it takes u to a black screen with a bunch of numbers then u definately need to reflash
0helpful
1answer

Dead phone but keypad flashes

replace the LCD + flexcable on the phone.
0helpful
4answers

Razr help

Sounds like your phone's been through some rough treatment - try taking the battery & sim card off for a while - make sure there's no moisture & if you're still having problems, stop by your dealership shop & see what they can do.
0helpful
3answers

My phone not turn on

Check the mobile using another battery then it works normaly this is the problem due to battery.Recharge old battery using external charger
Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

82 views

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Relax
Relax

Level 3 Expert

34280 Answers

Thejus Mt
Thejus Mt

Level 1 Expert

30 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...