Question about HP DeskJet 5652 InkJet Printer

1 Answer

HP Deskjet 5652 does'nt have power.

My printer HP deskjet 5652 does'nt have power, if i switch on. i've check the power adapter of the printer and the cord, they are all ok. maybe the problem is in the power of printer, maybe the fuse (if there is) or some ic disorder.But the real problem is i can't open the unit, can u give manuals or instruction how to dismantle this printer so that i can check ic's, fuse etc.... if they are functioning. Hoping for immediate action.. Thank in advance and God Bless

Posted by annalily on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 363 Answers

Undo the screws underneath. if they are self tapping screws then most likely these are the ones holding the cover on. Check for screw holes under labels and feet by feel. Now look for catches in slots to ease to one side while putting some pressure on the cover to lift it away. The process of getting a cover off without scratching or breaking anything can take longer than a repair. Just try not to lose patience and force anything if this printer is valuable to you. You'll probably find that there is a whole lot less stuff inside the printer than you thought. The ic's will just be 1 or 2 LSI's everything will be surface mount and apart from checking a few connectors and switches and that power is getting to the PCB as you suggested there will be little else you can do without the service manual. Have fun anyway!

Posted on Sep 23, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


How to print test page for HP deskjet 5652?

Press and hold down the Resume button until the printer starts printing a self-test
page, then release the button.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at


All leds blinking

The printer needs to be restarted when all lights are flashing on your HP deskjet 5652 printer. Below are the steps:
  1. Press the Power button to turn off the printer, and then press it again to turn on the printer.
  2. If the problem persists, turn off the printer.
  3. Disconnect the power cable from the power source.
  4. Reconnect the power cord.
  5. Turn the printer on.


Why am not able to see ink level with my hp deskjet 5652 with vista operating system!

because the driver was not updated for Vista Non of the Epson ink levels show in Vista either so its not just your HP/appear to have no plan to update this feature for this model

Please rate the help++++Thanks for using FIXYA

5652 and Vista - duplex print not working

In Vista the default s the duplexer is "not installed". Go to Start, Settings, Control Panel, Printers, double-click on the Deskjet, Printers, Properties, Device Settings and set the duplexer to "Installed".

If the duplexer prints the back side upside down in Vista once it is enabled you can get a patch as described here.

Bob Headrick, Microsoft MVP Printing/Imaging

HP deskjet 5652

Well, one way is to just take the paper out when it tries, and when it gives you an error message tell it to abort the print. Another way is that the second it starts printing press the power button, or cancel button if it has it, that will tell the printer to stop printing.
Not finding what you are looking for?
HP DeskJet 5652 InkJet Printer Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6280 Answers


Level 3 Expert

8092 Answers


Level 3 Expert

4377 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides