Frequency out of range, it read , please change the display mode to 1440 + 900 with 60Hz.

Question 1

0helpful

1answer

"frequency out of range"

WHEN STARTING WINDOWS PRESS F8 KEY AND START PC IN SAFE MODE.. THEN CHANGE DISPLAY MODE TO 800BY 600 RESOLUTION

Jun 11, 2013 • E-Machines eMachines Monitor E15T4

0helpful

1answer

Frequency out of range 11khz/ 119khz message

The PC is sending out the resolution that is too high for the monitor to handle, you need to set the resolution of the PC to be the native resolution of the monitor and set the refesh rate to be at 60Hz.

Jan 12, 2010 • Envision H191W Monitor

2helpful

3answers

I get a message, "Frequency out of range. Nothibng else. The menue and other buttons don't do anything. Nothing else shows. I swapped out the monitor and the new one works.

This problem arise when your computer AGP driver not adjust monitor frequency.you fix it restart your computer and run safe mode settings resolution area(must be choice less area)or select 1024X768 pixel monitor frequency 60Hz press apply set OK.restart your computer.Run again normal mode.May be fix your problem.

Dec 27, 2009 • Princeton Digital VL1916 19" LCD Monitor

0helpful

1answer

In the middle of my screen a blue box is showing and in it this reads OUT OF RANGE H. FREQUENCY 68.7 KHz V. FREQUENCY 85.0Hz What does this mean and how can I fix it this was a gift...

That message appears when the Windoze display settings exceed the monitor capabilities. If you will boot into windoze safe mode (F8 at boot) and correct the display settings, the message should clear at the next boot. Afterwards you can right click on the desktop and access the display settings to make final adjustments.

In your case, the refresh rate (V Frequency) should not exceed 70 Hz

Nov 23, 2009 • Envision H22W 22" Monitor

0helpful

1answer

"out of frequency range" message nothing works

Try booting to the ENABLE VGA mode off the F8 menu if you can get to the desktop and then you can go to display properties and see if you can reset the resolution to normal. If no go, try updating the video driver

Oct 02, 2009 • HP Compaq FS 7550 17 in.CRT Conventional...

2helpful

2answers

View sonic -E70fB monitor displaying H.V frequency out of range when ever i play a game on the monitor screen it is displaying h.v frequency out of range....how to solve this problem

view sonic -E70fB monitor displaying H.V frequency out of range
when ever i play a game on the monitor screen it is displaying h.v frequency out of range....how to solve this problem

Jun 06, 2009 • ViewSonic G70F 17'' Monitor + Wyse Winterm...

0helpful

3answers

At start up it displays a message "frequency out of range" please change the display mode to 1280 x 1024 with 60Hz, any idea why its doing this and how to solve this issue so i can log back on to wind

Sounds like you you have a video driver issues. Disconnect your monitor while your PC is still on, and then reconnect it, and perform a reboot...

May 21, 2009 • Princeton Digital VL1919 19" Monitor

0helpful

1answer

Adjusted my graphics card settings and now my crt monitor G90f view sonic is stuck with this notice in the middle of the screen ;out of range H.Frequency 9 5 KHZ , V.Frequency 6 0 HZ i am unable to reset...

Hello

Boot to safe mode and and change the display mode.

Apr 21, 2009 • Computers & Internet

0helpful

1answer

Monitor shows out of range when not in safe mode

Mine displayed out of range when i tried to go too high with the screen resolution. Totally flipping out like an untuned tv. Display properties of 1280x800 work best for me... though i wish i could go bigger without weird stretching of the view

Jul 24, 2008 • X2Gen MG19MY 19" LCD Monitor

3helpful

1answer

OUT OF RANGE on monitor screen

you have to change frequency of monitor to work smoothly form display property.

Out of Range is frequency is not matching

To solve this, wwhile booting Press F8 to get advanced boot menu from that select "Enable VGA mode"

change the display properties

right click on desktop - Select properties - Settings - Advanced (from bottom) - goto monitor tab - change the frequecny to default. and restart the system normal mode

May 25, 2008 • XFX GeForce FX 5200 Graphic Card

Question 2

C. Christensen

Expert 177 Answers
Posted on Apr 20, 2009

C. Christensen

Expert

Joined: Mar 19, 2009

Answers

177

Questions

0

Helped

53113

Points

496

You need to Set the Desktop Display Settings to match those advised by the monitor... in other words, your desktop's resolution settings aren't supported by that monitor, so right click on desktop, choose settings, and change the resolution (1440 x 900 ) and set the Refresh Rate (60 Hz).

Answer 2

Anonymous

Contributor 27 Answers
Posted on Oct 24, 2011

Anonymous

Contributor

Joined: Oct 24, 2011

Answers

27

Questions

2

Helped

7376

Points

30

Just drop youir setting for resolution down real low .. then hit apply and see if it takes it and dont holler ... i just went thru the same thing ... this is what fied mine ... if it takes it with out the window coming up , you cant then work your way back up to where it looks good for you .. mine is set to 1280x1024 @ 60hrz

Related Topics:

Trustworthy Expert Solutions

Frequency out of range, it read , please change the display mode to 1440 + 900 with 60Hz.

2 Answers

C. Christensen

Anonymous

Add Your Answer

Attachments: Added items

Related Questions: