Samsung wait image - Samsung SCX-4828FN All-In-One Laser Printer

The printer could be configured incorrectly or not properly been set up . Check the settings and the preferences to be able to print and make sure that all of the print settings are all correct. The printer driver might be not properly installed.

1, I have samsung C430W printer..I replace the transfer imaging unit but still it showing to replace it..how can I reset the page count of transfer imaging unit...please help...

2, Turn Off the Samsung C430W printer using its Power button or disconnect the power cord from the back of the device and also from the wall outlet. Else, turn Off the switch present near the socket. Wait for about a minute. Replug the cord between the printer and the outlet. Power On the device and verify if the problem is solved.

3, To reset the page count, Click the Reset Fuser Life button and then choose the OK button, this resets the fuser. If the error is not rectified, the imaging unit has to be reinstalled or replace it with a new one again.
For more printer related queries get in touch with our experts by just giving a call @ 1-866-293-9220

is it to hard to says laser printer?
in what window, PC or printer.???LCD.?????
what PC
what OS
did you , install all the samsung software first.??

It sounds like the image stabilization/calibration has not been completed properly, remove 3 print cartridges ( any) switch unit back on and wait for display to ask for other cartridges, - insert when asked and allow the machine to complete the calibration, alternatively use the menu function and look for image stabilization under diagnostics and activate.

Check and replace the main system control memory IC.

this sounds like a main board issue, is the fault from new?

hi how r u....??

This may be due to so many factors. Fuser unit, LSU. Main board. imaging unit consumables etc.
Please take it authorised service center only